Convert Samsung Exynos Soc Multi Core Timer bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
.../bindings/timer/samsung,exynos4210-mct.txt | 88 --------------
.../timer/samsung,exynos4210-mct.yaml | 115 ++++++++++++++++++
2 files changed, 115 insertions(+), 88 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
create mode 100644 Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
deleted file mode 100644
index 8f78640ad64c..000000000000
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Samsung's Multi Core Timer (MCT)
-
-The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
-global timer and CPU local timers. The global timer is a 64-bit free running
-up-counter and can generate 4 interrupts when the counter reaches one of the
-four preset counter values. The CPU local timers are 32-bit free running
-down-counters and generate an interrupt when the counter expires. There is
-one CPU local timer instantiated in MCT for every CPU in the system.
-
-Required properties:
-
-- compatible: should be "samsung,exynos4210-mct".
- (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
- (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
-
-- reg: base address of the mct controller and length of the address space
- it occupies.
-
-- interrupts: the list of interrupts generated by the controller. The following
- should be the order of the interrupts specified. The local timer interrupts
- should be specified after the four global timer interrupts have been
- specified.
-
- 0: Global Timer Interrupt 0
- 1: Global Timer Interrupt 1
- 2: Global Timer Interrupt 2
- 3: Global Timer Interrupt 3
- 4: Local Timer Interrupt 0
- 5: Local Timer Interrupt 1
- 6: ..
- 7: ..
- i: Local Timer Interrupt n
-
- For MCT block that uses a per-processor interrupt for local timers, such
- as ones compatible with "samsung,exynos4412-mct", only one local timer
- interrupt might be specified, meaning that all local timers use the same
- per processor interrupt.
-
-Example 1: In this example, the IP contains two local timers, using separate
- interrupts, so two local timer interrupts have been specified,
- in addition to four global timer interrupts.
-
- mct@10050000 {
- compatible = "samsung,exynos4210-mct";
- reg = <0x10050000 0x800>;
- interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
- <0 42 0>, <0 48 0>;
- };
-
-Example 2: In this example, the timer interrupts are connected to two separate
- interrupt controllers. Hence, an interrupt-map is created to map
- the interrupts to the respective interrupt controllers.
-
- mct@101c0000 {
- compatible = "samsung,exynos4210-mct";
- reg = <0x101C0000 0x800>;
- interrupt-parent = <&mct_map>;
- interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-
- mct_map: mct-map {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0 &gic 0 57 0>,
- <1 &gic 0 69 0>,
- <2 &combiner 12 6>,
- <3 &combiner 12 7>,
- <4 &gic 0 42 0>,
- <5 &gic 0 48 0>;
- };
- };
-
-Example 3: In this example, the IP contains four local timers, but using
- a per-processor interrupt to handle them. Either all the local
- timer interrupts can be specified, with the same interrupt specifier
- value or just the first one.
-
- mct@10050000 {
- compatible = "samsung,exynos4412-mct";
- reg = <0x10050000 0x800>;
-
- /* Both ways are possible in this case. Either: */
- interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
- <0 42 0>;
- /* or: */
- interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
- <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
- };
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
new file mode 100644
index 000000000000..b96d2877955f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Multi Core Timer (MCT)
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
+
+description: |+
+ The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+ global timer and CPU local timers. The global timer is a 64-bit free running
+ up-counter and can generate 4 interrupts when the counter reaches one of the
+ four preset counter values. The CPU local timers are 32-bit free running
+ down-counters and generate an interrupt when the counter expires. There is
+ one CPU local timer instantiated in MCT for every CPU in the system.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4210-mct
+ - samsung,exynos4412-mct
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ Interrupts should be put in specific order. This is, the local timer
+ interrupts should be specified after the four global timer interrupts
+ have been specified:
+ 0: Global Timer Interrupt 0
+ 1: Global Timer Interrupt 1
+ 2: Global Timer Interrupt 2
+ 3: Global Timer Interrupt 3
+ 4: Local Timer Interrupt 0
+ 5: Local Timer Interrupt 1
+ 6: ..
+ 7: ..
+ i: Local Timer Interrupt n
+ For MCT block that uses a per-processor interrupt for local timers, such
+ as ones compatible with "samsung,exynos4412-mct", only one local timer
+ interrupt might be specified, meaning that all local timers use the same
+ per processor interrupt.
+ minItems: 5 # 4 Global + 1 local
+ maxItems: 20 # 4 Global + 16 local
+
+required:
+ - compatible
+ - interrupts
+ - reg
+
+examples:
+ - |
+ // In this example, the IP contains two local timers, using separate
+ // interrupts, so two local timer interrupts have been specified,
+ // in addition to four global timer interrupts.
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+ <0 42 0>, <0 48 0>;
+ };
+
+ - |
+ // In this example, the timer interrupts are connected to two separate
+ // interrupt controllers. Hence, an interrupt-map is created to map
+ // the interrupts to the respective interrupt controllers.
+
+ mct@101c0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &gic 0 57 0>,
+ <1 &gic 0 69 0>,
+ <2 &combiner 12 6>,
+ <3 &combiner 12 7>,
+ <4 &gic 0 42 0>,
+ <5 &gic 0 48 0>;
+ };
+ };
+
+ - |
+ // In this example, the IP contains four local timers, but using
+ // a per-processor interrupt to handle them. Only one first local
+ // interrupt is specified.
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+
+ interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+ <0 42 0>;
+ };
+
+ - |
+ // In this example, the IP contains four local timers, but using
+ // a per-processor interrupt to handle them. All the local timer
+ // interrupts are specified.
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+
+ interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>,
+ <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>;
+ };
--
2.17.1
