On Thu, Sep 05, 2019 at 07:26:00PM +0300, Vitaly Gaiduk wrote:
> Add documentation of ti,sgmii-type which can be used to select
> SGMII mode type (4 or 6-wire).
>
> Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@xxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/net/ti,dp83867.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
> index db6aa3f2215b..18e7fd52897f 100644
> --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
> +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
> @@ -37,6 +37,7 @@ Optional property:
> for applicable values. The CLK_OUT pin can also
> be disabled by this property. When omitted, the
> PHY's default will be left as is.
> + - ti,sgmii-type - This denotes the fact which SGMII mode is used (4 or 6-wire).
Hi Vitaly
You probably want to make this a Boolean. I don't think SGMII type is
a good idea. This is about enabling the receive clock to be passed to
the MAC. So how about ti,sgmii-ref-clock-output-enable.
Andrew
