Hi Krzysztof, On 9/6/19 12:56 PM, Krzysztof Kozlowski wrote: > On Fri, 6 Sep 2019 at 12:14, Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> wrote: >> >> Add description of bindings for Samsung k3qf2f20db LPDDR3 memory. >> Minor fixes in the old documentation. >> >> Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx> >> --- >> .../devicetree/bindings/ddr/lpddr3.txt | 29 +++++++++++++++++-- >> 1 file changed, 27 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt >> index 3b2485b84b3f..de0905239767 100644 >> --- a/Documentation/devicetree/bindings/ddr/lpddr3.txt >> +++ b/Documentation/devicetree/bindings/ddr/lpddr3.txt >> @@ -40,10 +40,34 @@ Child nodes: >> a given speed-bin. Please see Documentation/devicetree/ >> bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings" >> >> +Samsung K3QF2F20DB LPDDR3 memory >> +------------------------------------------------------------ >> + >> +This binding uses the LPDDR3 binding (described above) >> + >> +Required properties: >> +- compatible: Should be: >> + "samsung,K3QF2F20DB" >> + followed by "jedec,lpddr3" >> +- density : <u32> representing density in Mb (Mega bits) >> +- io-width : <u32> representing bus width. Possible value 32 >> +- #address-cells: Must be set to 1 >> +- #size-cells: Must be set to 0 > > If you decided to repeat all properties again, then it deserves its > own bindings file. However I though about simpler solution - just > document compatible. Exactly the same as AT24 or AT25 EEPROM bindings. > There is not much benefit from copying all these properties. OK, I see. I will add only 'compatible' and skip the rest then. So the lpddr3.txt file will get this addition: +Samsung K3QF2F20DB LPDDR3 memory +------------------------------------------------------------ + +This binding uses the LPDDR3 binding (described above) + +Required properties: +- compatible: Should be: + "samsung,K3QF2F20DB" + followed by "jedec,lpddr3" + +Optional properties: + +The optional properties are the same as in the LPDDR3 generic bindings and +values should be taken from the data-sheet. Detailed bindings are described +above. + +Child nodes: + +Detailed bindings are described in LPDDR3 generic bindings described above. + Is it OK? Regards, Lukasz
