Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 8 +++ arch/arm/boot/dts/imx6qdl-microsom.dtsi | 98 +++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index c928c0a5e3cc..67fe5585f6dd 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -152,6 +152,14 @@ status = "okay"; }; +&uart4 { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index d729d0b15f25..a5d72895d9ce 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -1,9 +1,69 @@ /* * Copyright (C) 2013,2014 Russell King */ +#include <dt-bindings/gpio/gpio.h> +/ { + regulators { + compatible = "simple-bus"; + + reg_brcm_osc: brcm-osc-reg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_osc_reg>; + regulator-name = "brcm_osc_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_brcm: brcm-reg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; + }; +}; &iomuxc { microsom { + pinctrl_microsom_brcm_osc_reg: microsom-brcm-osc-reg { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; + + pinctrl_microsom_brcm_reg: microsom-brcm-reg { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 + >; + }; + + pinctrl_microsom_brcm_wifi: microsom-brcm-wifi { + fsl,pins = < + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 + >; + }; + + pinctrl_microsom_brcm_bt: microsom-brcm-bt { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; + pinctrl_microsom_uart1: microsom-uart1 { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 @@ -11,6 +71,15 @@ >; }; + pinctrl_microsom_uart4_1: microsom-uart4 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + pinctrl_microsom_usbotg: microsom-usbotg { /* * Similar to pinctrl_usbotg_2, but we want it @@ -18,6 +87,17 @@ */ fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; }; + + pinctrl_microsom_usdhc1: microsom-usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; }; }; @@ -27,7 +107,25 @@ status = "okay"; }; +/* UART4 - Connected to optional BRCM Wifi/BT/FM */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4_1>; + fsl,uart-has-rtscts; +}; + &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_usbotg>; }; + +/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */ +&usdhc1 { + card-external-vcc-supply = <®_brcm>; + card-reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, <&gpio6 0 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>; + vmmc-supply = <®_brcm>; +}; -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html