Hi,
* H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [190904 08:54]:
> According to omap.txt bindings documentation, matching the ti-cpufreq driver needs
> to specify explicitly if a board uses an omap3430 or omap36xx chip.
>
> This needs to add ti,omap3430 to most omap34xx boards and replace ti,omap3630
> by ti,omap36xx for some omap36xx boards (most others already have done it right).
>
> We also clean up some instances of missing ti,am3517 so that we can rely on
> seeing either one of:
>
> ti,am3517
> ti,omap34xx
> ti,omap36xx
>
> in addition to ti,omap3.
Please set up things to use ti,omap3630 in addition to ti,omap36xx
for compatible to avoid churning the same files later.
> diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
> --- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
> +++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
> @@ -9,5 +9,5 @@
>
> / {
> model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
> - compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
> + compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap36xx", "ti,omap3";
> };
So just make this:
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap36xx", "ti,omap3";
And so on. It's fine to use ti,omap3630 for 37xx too as they're the same.
> diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
> index 9a5fde2d9bce..9947574bd0f8 100644
> --- a/arch/arm/boot/dts/omap3-ldp.dts
> +++ b/arch/arm/boot/dts/omap3-ldp.dts
> @@ -10,7 +10,7 @@
>
> / {
> model = "TI OMAP3430 LDP (Zoom1 Labrador)";
> - compatible = "ti,omap3-ldp", "ti,omap3";
> + compatible = "ti,omap3-ldp", "ti,omap34xx, "ti,omap3";
This fails to compile, it's missing a '"' for ti,omap34xx. And here too,
please update to use:
compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap34xx", "ti,omap3";
And again it's fine to add "ti,omap3430" for 3530 variants.
Regards,
Tony
