Hi Tomasz,
On Wed, 2019-09-04 at 21:19 +0800, Jerry-ch Chen wrote:
> On Wed, 2019-09-04 at 21:12 +0800, Tomasz Figa wrote:
> > On Wed, Sep 4, 2019 at 6:26 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > >
> > > Hi Tomasz,
> > >
> > > On Wed, 2019-09-04 at 17:03 +0800, Tomasz Figa wrote:
> > > > On Wed, Sep 4, 2019 at 6:02 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > >
> > > > > Hi Tomasz,
> > > > >
> > > > > On Wed, 2019-09-04 at 16:25 +0800, Tomasz Figa wrote:
> > > > > > On Wed, Sep 4, 2019 at 5:09 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > Hi Tomasz,
> > > > > > >
> > > > > > > On Wed, 2019-09-04 at 14:34 +0800, Tomasz Figa wrote:
> > > > > > > > On Wed, Sep 4, 2019 at 3:09 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > >
> > > > > > > > > Hi Tomasz,
> > > > > > > > >
> > > > > > > > > On Wed, 2019-09-04 at 12:15 +0800, Tomasz Figa wrote:
> > > > > > > > > > On Wed, Sep 4, 2019 at 12:38 PM Jerry-ch Chen
> > > > > > > > > > <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > > > >
> > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > >
> > > > > > > > > > > On Tue, 2019-09-03 at 20:05 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > On Tue, Sep 3, 2019 at 8:46 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Tue, 2019-09-03 at 15:04 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > On Tue, Sep 3, 2019 at 3:44 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On Tue, 2019-09-03 at 13:19 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > > On Mon, Sep 2, 2019 at 8:47 PM Jerry-ch Chen <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > On Fri, 2019-08-30 at 16:33 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > > > > On Wed, Aug 28, 2019 at 11:00 AM Jerry-ch Chen
> > > > > > > > > > > > > > > > > > <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > On Mon, 2019-08-26 at 14:36 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > > > > > > Hi Jerry,
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > On Sun, Aug 25, 2019 at 6:18 PM Jerry-ch Chen
> > > > > > > > > > > > > > > > > > > > <Jerry-ch.Chen@xxxxxxxxxxxx> wrote:
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > On Fri, 2019-08-02 at 16:28 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > > > > > > > > Hi Jerry,
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > On Tue, Jul 09, 2019 at 04:41:12PM +0800, Jerry-ch Chen wrote:
> > > [snip]
> > > > > > > static void mtk_fd_vb2_stop_streaming(struct vb2_queue *vq)
> > > > > > > {
> > > > > > > struct mtk_fd_ctx *ctx = vb2_get_drv_priv(vq);
> > > > > > > struct mtk_fd_dev *fd = ctx->fd_dev;
> > > > > > > struct vb2_v4l2_buffer *vb;
> > > > > > > struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > > > > > > struct v4l2_m2m_queue_ctx *queue_ctx;
> > > > > > > u32 ret;
> > > > > > >
> > > > > > > if (!fd->fd_irq_done.done)
> > > > > >
> > > > > > We shouldn't access internal fields of completion.
> > > > > >
> > > > > > > ret = wait_for_completion_timeout(&fd->fd_irq_done,
> > > > > > > msecs_to_jiffies(
> > > > > > > MTK_FD_HW_TIMEOUT));
> > > > > > > queue_ctx = V4L2_TYPE_IS_OUTPUT(vq->type) ?
> > > > > > > &m2m_ctx->out_q_ctx :
> > > > > > > &m2m_ctx->cap_q_ctx;
> > > > > > > while ((vb = v4l2_m2m_buf_remove(queue_ctx)))
> > > > > > > v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> > > > > > >
> > > > > > > if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> > > > > > > mtk_fd_hw_disconnect(fd);
> > > > > > > }
> > > > > > >
> > > > > > > I've also tried to wait completion unconditionally for both queues and
> > > > > > > the second time will wait until timeout, as a result, it takes longer to
> > > > > > > swap the camera every time and close the camera app.
> > > > > >
> > > > > > I think it should work better if we call complete_all() instead of complete().
> > > > > >
> > > > > Thanks,
> > > > >
> > > > > I use complete_all(), and it works fine now.
> > > > >
> > > > > static void mtk_fd_vb2_stop_streaming(struct vb2_queue *vq)
> > > > > {
> > > > > struct mtk_fd_ctx *ctx = vb2_get_drv_priv(vq);
> > > > > struct mtk_fd_dev *fd = ctx->fd_dev;
> > > > > struct vb2_v4l2_buffer *vb;
> > > > > struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > > > > struct v4l2_m2m_queue_ctx *queue_ctx;
> > > > >
> > > > > wait_for_completion_timeout(&fd->fd_irq_done,
> > > > > msecs_to_jiffies(MTK_FD_HW_TIMEOUT));
> > > >
> > > > Shouldn't we still send some command to the hardware to stop? Like a
> > > > reset. Otherwise we don't know if it isn't still accessing the memory.
> > > >
> > > I thought no more jobs will be enqueued here when stop_streaming so we
> > > don't need it.
> >
> > That's true for the case when the wait completed successfully, but we
> > also need to ensure the hardware is stopped even if a timeout happens.
> >
> > > We still could send an ipi command to reset the HW, and wait for it's
> > > callback or we could set the register MTK_FD_REG_OFFSET_HW_ENABLE to
> > > zero to disable the HW.
> >
> > Since it's for handling a timeout, a reset should be more likely to
> > bring the hardware back to a reasonable state.
> >
>
> Ok, I will send the ipi command to reset the HW.
>
> Thanks and best regards,
> Jerry
I've tested and will refine as following:
static void mtk_fd_vb2_stop_streaming(struct vb2_queue *vq)
{
struct mtk_fd_ctx *ctx = vb2_get_drv_priv(vq);
struct mtk_fd_dev *fd = ctx->fd_dev;
struct vb2_v4l2_buffer *vb;
struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
struct v4l2_m2m_queue_ctx *queue_ctx;
u32 ret;
ret = wait_for_completion_timeout(&fd->fd_irq_done,
msecs_to_jiffies(MTK_FD_HW_TIMEOUT));
/* Disable FD HW */
if(!ret) {
struct ipi_message fd_ipi_msg;
fd_ipi_msg.cmd_id = MTK_FD_IPI_CMD_RESET;
ret = scp_ipi_send(fd->scp_pdev, SCP_IPI_FD_CMD, &fd_ipi_msg,
sizeof(fd_ipi_msg), MTK_FD_IPI_SEND_TIMEOUT);
if (ret)
dev_err(fd->dev, "FD Reset HW error\n");
}
queue_ctx = V4L2_TYPE_IS_OUTPUT(vq->type) ?
&m2m_ctx->out_q_ctx :
&m2m_ctx->cap_q_ctx;
while ((vb = v4l2_m2m_buf_remove(queue_ctx)))
v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
mtk_fd_hw_disconnect(fd);
}
If there is no other concern, may I send the RFC v3 patch for review?
Thanks and best regards,
Jerry
> > >
> > > Best regards,
> > > Jerry
> > >
> > > > > queue_ctx = V4L2_TYPE_IS_OUTPUT(vq->type) ?
> > > > > &m2m_ctx->out_q_ctx :
> > > > > &m2m_ctx->cap_q_ctx;
> > > > > while ((vb = v4l2_m2m_buf_remove(queue_ctx)))
> > > > > v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> > > > >
> > > > > if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> > > > > mtk_fd_hw_disconnect(fd);
> > > > > }
> > > > >
> > > > > Best regards,
> > > > > Jerry
> > > > >
> > > > > > Best regards,
> > > > > > Tomasz
> > > > >
> > > > >
> > >
> > >
>
