On 04-09-19, 12:39, Lee Jones wrote: > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb Can we keep this sorted, so before mtp. > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts > new file mode 100644 > index 000000000000..ad160c718b33 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts > @@ -0,0 +1,454 @@ > +// SPDX-License-Identifier: GPL-2.0 Are we going to make this dual? or BSD.. > +&apps_rsc { > + pm8998-rpmh-regulators { > + compatible = "qcom,pm8998-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; > + > + vreg_s2a_1p125: smps2 { > + }; > + > + vreg_s3a_1p35: smps3 { > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s4a_1p8: smps4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5a_2p04: smps5 { > + regulator-min-microvolt = <2040000>; > + regulator-max-microvolt = <2040000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s7a_1p025: smps7 { Any reason why we dont specify the mode and min/max voltage for this and few others below..? > +&i2c1 { > + status = "okay"; > + clock-frequency = <400000>; > + qcom,geni-se-fifo; > + > + battery@70 { > + compatible = "some,battery"; some,battery ..? > +&qup_i2c12_default { Please move the qup nodes up so that nodes are sorted alphabetically -- ~Vinod