On 03-09-19, 08:23, H. Nikolaus Schaller wrote:
>
> > Am 03.09.2019 um 08:14 schrieb Viresh Kumar <viresh.kumar@xxxxxxxxxx>:
> >
> > On 03-09-19, 08:01, H. Nikolaus Schaller wrote:
> >>
> >>> Am 03.09.2019 um 04:36 schrieb Viresh Kumar <viresh.kumar@xxxxxxxxxx>:
> >>>
> >>> On 02-09-19, 12:55, H. Nikolaus Schaller wrote:
> >>>> With opp-v2 in omap36xx.dtsi and ti-cpufreq driver the
> >>>> 1GHz capability is automatically detected.
> >>>>
> >>>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> >>>> ---
> >>>> arch/arm/boot/dts/omap3-n950-n9.dtsi | 7 -------
> >>>> 1 file changed, 7 deletions(-)
> >>>>
> >>>> diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> >>>> index 5441e9ffdbb4..e98b0c615f19 100644
> >>>> --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
> >>>> +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
> >>>> @@ -11,13 +11,6 @@
> >>>> cpus {
> >>>> cpu@0 {
> >>>> cpu0-supply = <&vcc>;
> >>>> - operating-points = <
> >>>> - /* kHz uV */
> >>>> - 300000 1012500
> >>>> - 600000 1200000
> >>>> - 800000 1325000
> >>>> - 1000000 1375000
> >>>> - >;
> >>>> };
> >>>> };
> >>>
> >>> This should be merged with 2/5 ?
> >>
> >> Well, it bloats 2/5.
> >
> > It is logically the right place to do this as that's where we are
> > adding opp-v2.
>
> Well, sometimes the philosophy of patches is to add something new
> first and remove the old in a second separate patch if the system
> can live with both. This makes it easier to digest single patches
> (because they are smaller) and might also better pinpoint an issue
> by bisect.
Right, but you already removed some of the opp-v1 stuff in patch 2/5.
Why leave this one out ?
> >
> >> What I hope (I can't test) is that this opp-v1 table
> >> is ignored if an opp-v2 table exists. So that it can be
> >> removed by a separate follow-up patch.
> >
> > It should work as that's what we are doing in OPP core, but I still
> > feel this better get merged with 2/5.
>
> Ok, I see. Noted for RFCv2.
>
> There will also be a big batch of changes for the compatible record
> (omap3530->omap35xx, add omap34xx where needed) of ca. 10 board definition
> DTS files. Should this then also become part of the new 2/5?
Compatible thing should be separate patch anyway, I was just talking
about replacing opp-v1 with v2.
--
viresh
