[PATCH V2 3/5] arm64: dts: imx8qxp: Add scu power key node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add scu power key node for i.MX8QXP, disabled by default as it
depends on board design.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
Changes since V1:
	- remove "wakeup-source" property, as it is NOT needed for scu mu interrupt;
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 1133b41..85c5534 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/imx8-clock.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
 
@@ -174,6 +175,12 @@
 			#power-domain-cells = <1>;
 		};
 
+		scu_pwrkey: scu-pwrkey {
+			compatible = "fsl,imx8qxp-sc-pwrkey", "fsl,imx-sc-pwrkey";
+			linux,keycode = <KEY_POWER>;
+			status = "disabled";
+		};
+
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux