Add document describing device tree bindings for MAX14577 MFD
drivers: MFD core, extcon, regulator and charger.
Both MAX14577 and MAX77836 chipsets are documented.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/max14577.txt | 152 +++++++++++++++++++++
1 file changed, 152 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
new file mode 100644
index 000000000000..b235250a7b41
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -0,0 +1,152 @@
+Maxim MAX14577/77836 Multi-Function Device
+
+MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
+Battery Charger and SFOUT LDO output for powering USB devices. It is
+interfaced to host controller using I2C.
+
+MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+
+
+Required properties:
+- compatible : Must be "maxim,max14577" or "maxim,max77836".
+- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
+- interrupts : IRQ line for the chip.
+- interrupt-parent : The parent interrupt controller.
+
+
+Required nodes:
+ - charger :
+ Node for configuring the charger driver.
+ Required properties:
+ - compatible : "maxim,max14577-charger"
+ or "maxim,max77836-charger"
+ - maxim,fast-charge-timer : Timer in hours to trigger the
+ INT3/MBCCHGERR interrupt; Valid values:
+ - 5, 6 or 7 (hours),
+ - 0 to disable.
+ - maxim,fast-charge-uamp : Current in uA for Fast Charge;
+ Valid values:
+ - for max14577: 90000 - 950000;
+ - for max77836: 45000 - 475000;
+ - maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
+ Valid values:
+ - for max14577: 50000 - 200000;
+ - for max77836: 5000 - 100000;
+ - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
+ In an overvoltage condition, INT asserts and charging
+ stops. Valid values:
+ - 6000000, 6500000, 7000000, 7500000;
+ - maxim,constant-uvolt : Battery Constant Voltage in uV;
+ Valid values:
+ - 4000000 - 4280000 (step by 20000);
+ - 4350000;
+
+
+Optional nodes:
+- max14577-muic/max77836-muic :
+ Node used only by extcon consumers.
+ Required properties:
+ - compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
+
+- regulators :
+ Required properties:
+ - compatible : "maxim,max14577-regulator"
+ or "maxim,max77836-regulator"
+
+ May contain a sub-node per regulator from the list below. Each
+ sub-node should contain the constraints and initialization information
+ for that regulator. See regulator.txt for a description of standard
+ properties for these sub-nodes.
+
+ List of valid regulator names:
+ - for max14577: CHARGER, SAFEOUT.
+ - for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
+
+ The SAFEOUT is a fixed voltage regulator so there is no need to specify
+ voltages for it.
+
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+max14577@25 {
+ compatible = "maxim,max14577";
+ reg = <0x25>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 IRQ_TYPE_NONE>;
+
+ muic: max14577-muic {
+ compatible = "maxim,max14577-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max14577-regulator";
+
+ SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+ CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <90000>;
+ regulator-max-microamp = <950000>;
+ regulator-boot-on;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max14577-charger";
+
+ maxim,fast-charge-timer = <6>;
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <450000>;
+ maxim,eoc-uamp = <50000>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+};
+
+
+max77836@25 {
+ compatible = "maxim,max77836";
+ reg = <0x25>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 IRQ_TYPE_NONE>;
+
+ muic: max77836-muic {
+ compatible = "maxim,max77836-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77836-regulator";
+
+ SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+ CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <90000>;
+ regulator-max-microamp = <950000>;
+ regulator-boot-on;
+ };
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+ LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max77836-charger";
+
+ maxim,fast-charge-timer = <6>;
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <225000>;
+ maxim,eoc-uamp = <7500>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
