On Fri, Aug 30, 2019 at 11:06:06PM +0200, Miquel Raynal wrote: > Document the logicPD I2S FPGA block bindings in yaml. > > Syntax verified with dt-doc-validate. > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > --- > .../bindings/sound/xlnx,logicpd-i2s.yaml | 57 +++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml > > diff --git a/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml b/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml > new file mode 100644 > index 000000000000..cbff641af199 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/xlnx,logicpd-i2s.yaml > @@ -0,0 +1,57 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/xlnx,logicpd-i2s.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Device-Tree bindings for Xilinx logicPD I2S FPGA block > + > +maintainers: > + - Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > + > +description: | > + The IP supports I2S playback/capture audio. It acts as a slave and > + clocks should come from the codec. It only supports two channels and > + S16_LE format. > + > +properties: > + compatible: > + items: > + - const: xlnx,logicpd-i2s > + > + reg: > + maxItems: 1 > + description: > + Base address and size of the IP core instance. > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + items: > + - description: tx interrupt > + - description: rx interrupt > + description: > + Either the Tx interruption or the Rx interruption or both. The schema says either tx or both. Doesn't really matter here as it's just numbers. > + > + interrupt-names: > + minItems: 1 > + maxItems: 2 > + items: > + - const: tx > + - const: rx But here it does matter. The easiest way to express this is: oneOf: - items: - enum: [ tx, rx ] - items: - const: tx - const: rx > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupts-controller > + > +examples: > + - | > + logii2s_dai: logii2s-dai@43c10000 { > + reg = <0x43c10000 0x1000>; > + compatible = "xlnx,logicpd-i2s-dai"; > + interrupt-parent = <&intc>; > + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "rx", "tx"; > + }; > -- > 2.20.1 >