Re: [PATCH v3 05/11] dt-bindings: pci: layerscape-pci: add compatible strings for ls1088a and ls2088a

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 02, 2019 at 11:17:10AM +0800, Xiaowei Bao wrote:
> Add compatible strings for ls1088a and ls2088a.
> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@xxxxxxx>
> ---
> v2:
>  - No change.
> v3:
>  - Use one valid combination of compatible strings.
> 
>  Documentation/devicetree/bindings/pci/layerscape-pci.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index e20ceaa..762ae41 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -22,7 +22,9 @@ Required properties:
>          "fsl,ls1043a-pcie"
>          "fsl,ls1012a-pcie"
>    EP mode:
> -	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
> +	"fsl,ls1046a-pcie-ep" "fsl,ls-pcie-ep"
> +	"fsl,ls1088a-pcie-ep" "fsl,ls-pcie-ep"
> +	"fsl,ls2088a-pcie-ep" "fsl,ls-pcie-ep"

This isn't consistent with "[PATCH v3 09/11] PCI: layerscape: Add EP mode..."
as that patch drops the fallback "fsl,ls-pcie-ep". Either the fallback must
be preserved in the driver, or you need to drop it here.

What if there are existing users that depend on the fallback?

(I'm also not sure if that comma should have been dropped).

Thanks,

Andrew Murray

>  - reg: base addresses and lengths of the PCIe controller register blocks.
>  - interrupts: A list of interrupt outputs of the controller. Must contain an
>    entry for each entry in the interrupt-names property.
> -- 
> 2.9.5
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux