Add missing linking regulator node to usb bus for power usb devices. Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Acked-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx> --- Re-base on linux-next Added Ack from Martin. Changes from previous patch [1] https://lore.kernel.org/patchwork/patch/1031243/ split the changes and add the comments to power source --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 0cb5831d9daf..d4c8b896dd26 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -36,8 +36,15 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from sehematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds { -- 2.23.0
