This fixes several issues with the ethoc network device config. Fisrt off, the compatible property used an obsolete compatibility string; this caused the initialization to be skipped. Next, the register map was not given enough space to allocate ring descriptors, this caused module initialization to abort. Finally, we need to mark this device as big-endian as needed by openrisc. This was tested by me in qemu, the setup is documented on the qemu wiki: https://wiki.qemu.org/Documentation/Platforms/OpenRISC Signed-off-by: Stafford Horne <shorne@xxxxxxxxx> --- arch/openrisc/boot/dts/or1ksim.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/openrisc/boot/dts/or1ksim.dts b/arch/openrisc/boot/dts/or1ksim.dts index d8aa8309c9d3..c0cb74e52f95 100644 --- a/arch/openrisc/boot/dts/or1ksim.dts +++ b/arch/openrisc/boot/dts/or1ksim.dts @@ -49,8 +49,9 @@ }; enet0: ethoc@92000000 { - compatible = "opencores,ethmac-rtlsvn338"; - reg = <0x92000000 0x100>; + compatible = "opencores,ethoc"; + reg = <0x92000000 0x800>; interrupts = <4>; + big-endian; }; }; -- 2.21.0
