Hi Maxime, >>> (Resend to add missing lists, sorry for the noise.) >>> >>> This series implements bluetooth support for Xunlong Orange Pi 3 board. >>> >>> The board uses AP6256 WiFi/BT 5.0 chip. >>> >>> Summary of changes: >>> >>> - add more delay to let initialize the chip >>> - let the kernel detect firmware file path >>> - add new compatible and update dt-bindings >>> - update Orange Pi 3 / H6 DTS >>> >>> Please take a look. >>> >>> thank you and regards, >>> Ondrej Jirman >>> >>> Ondrej Jirman (5): >>> dt-bindings: net: Add compatible for BCM4345C5 bluetooth device >>> bluetooth: bcm: Add support for loading firmware for BCM4345C5 >>> bluetooth: hci_bcm: Give more time to come out of reset >>> arm64: dts: allwinner: h6: Add pin configs for uart1 >>> arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth >>> >>> .../bindings/net/broadcom-bluetooth.txt | 1 + >>> .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ >>> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ >>> drivers/bluetooth/btbcm.c | 3 +++ >>> drivers/bluetooth/hci_bcm.c | 3 ++- >>> 5 files changed, 35 insertions(+), 1 deletion(-) >> >> all 5 patches have been applied to bluetooth-next tree. > > The DTS patches (last 2) should go through the arm-soc tree, can you > drop them? why is that? We have included DTS changes for Bluetooth devices directly all the time. What is different with this hardware? Regards Marcel
