[PATCH v7 3/6] usb: musb: Add get/set toggle hooks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Min Guo <min.guo@xxxxxxxxxxxx>

Add get/set toggle hooks in struct musb_io and struct musb_platform_ops
for special platform; remove function musb_save_toggle, use the set/get
callback to handle toggle.

Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
---
changes in v7:
1. no changes

changes in v6:
1. no changes

changes in v5:
1. no changes

new patch based on v4:
---
 drivers/usb/musb/musb_core.c | 42 ++++++++++++++++++++++++++++++++++++++++
 drivers/usb/musb/musb_core.h |  5 +++++
 drivers/usb/musb/musb_host.c | 46 ++++++++++----------------------------------
 drivers/usb/musb/musb_io.h   |  4 ++++
 4 files changed, 61 insertions(+), 36 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 9f5a481..491d361 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -274,6 +274,38 @@ static void musb_default_writew(void __iomem *addr, unsigned offset, u16 data)
 	__raw_writew(data, addr + offset);
 }
 
+static u16 musb_default_get_toggle(struct musb_qh *qh, int is_out)
+{
+	void __iomem *epio = qh->hw_ep->regs;
+	u16 csr;
+
+	if (is_out)
+		csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
+	else
+		csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
+
+	return csr;
+}
+
+static u16 musb_default_set_toggle(struct musb_qh *qh, int is_out,
+				   struct urb *urb)
+{
+	u16 csr;
+	u16 toggle;
+
+	toggle = usb_gettoggle(urb->dev, qh->epnum, is_out);
+
+	if (is_out)
+		csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
+				| MUSB_TXCSR_H_DATATOGGLE)
+				: MUSB_TXCSR_CLRDATATOG;
+	else
+		csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
+				| MUSB_RXCSR_H_DATATOGGLE) : 0;
+
+	return csr;
+}
+
 /*
  * Load an endpoint's FIFO
  */
@@ -2278,6 +2310,16 @@ static void musb_deassert_reset(struct work_struct *work)
 	else
 		musb->io.write_fifo = musb_default_write_fifo;
 
+	if (musb->ops->get_toggle)
+		musb->io.get_toggle = musb->ops->get_toggle;
+	else
+		musb->io.get_toggle = musb_default_get_toggle;
+
+	if (musb->ops->set_toggle)
+		musb->io.set_toggle = musb->ops->set_toggle;
+	else
+		musb->io.set_toggle = musb_default_set_toggle;
+
 	if (!musb->xceiv->io_ops) {
 		musb->xceiv->io_dev = musb->controller;
 		musb->xceiv->io_priv = musb->mregs;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 04203b7..9f5a69c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -27,6 +27,7 @@
 struct musb;
 struct musb_hw_ep;
 struct musb_ep;
+struct musb_qh;
 
 /* Helper defines for struct musb->hwvers */
 #define MUSB_HWVERS_MAJOR(x)	((x >> 10) & 0x1f)
@@ -123,6 +124,8 @@ enum musb_g_ep0_state {
  * @writew:	write 16 bits
  * @read_fifo:	reads the fifo
  * @write_fifo:	writes to fifo
+ * @get_toggle:	platform specific get toggle function
+ * @set_toggle:	platform specific set toggle function
  * @dma_init:	platform specific dma init function
  * @dma_exit:	platform specific dma exit function
  * @init:	turns on clocks, sets up platform-specific registers, etc
@@ -167,6 +170,8 @@ struct musb_platform_ops {
 	void	(*writew)(void __iomem *addr, unsigned offset, u16 data);
 	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
+	u16	(*get_toggle)(struct musb_qh *qh, int is_out);
+	u16	(*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb);
 	struct dma_controller *
 		(*dma_init) (struct musb *musb, void __iomem *base);
 	void	(*dma_exit)(struct dma_controller *c);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index eb308ec..ca866bc 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -286,26 +286,6 @@ static void musb_giveback(struct musb *musb, struct urb *urb, int status)
 	spin_lock(&musb->lock);
 }
 
-/* For bulk/interrupt endpoints only */
-static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
-				    struct urb *urb)
-{
-	void __iomem		*epio = qh->hw_ep->regs;
-	u16			csr;
-
-	/*
-	 * FIXME: the current Mentor DMA code seems to have
-	 * problems getting toggle correct.
-	 */
-
-	if (is_in)
-		csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE;
-	else
-		csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE;
-
-	usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
-}
-
 /*
  * Advance this hardware endpoint's queue, completing the specified URB and
  * advancing to either the next URB queued to that qh, or else invalidating
@@ -320,6 +300,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 	struct musb_hw_ep	*ep = qh->hw_ep;
 	int			ready = qh->is_ready;
 	int			status;
+	u16			toggle;
 
 	status = (urb->status == -EINPROGRESS) ? 0 : urb->status;
 
@@ -327,7 +308,8 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
 	switch (qh->type) {
 	case USB_ENDPOINT_XFER_BULK:
 	case USB_ENDPOINT_XFER_INT:
-		musb_save_toggle(qh, is_in, urb);
+		toggle = musb->io.get_toggle(qh, !is_in);
+		usb_settoggle(urb->dev, qh->epnum, !is_in, toggle ? 1 : 0);
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
 		if (status == 0 && urb->error_count)
@@ -772,13 +754,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 					);
 			csr |= MUSB_TXCSR_MODE;
 
-			if (!hw_ep->tx_double_buffered) {
-				if (usb_gettoggle(urb->dev, qh->epnum, 1))
-					csr |= MUSB_TXCSR_H_WR_DATATOGGLE
-						| MUSB_TXCSR_H_DATATOGGLE;
-				else
-					csr |= MUSB_TXCSR_CLRDATATOG;
-			}
+			if (!hw_ep->tx_double_buffered)
+				csr |= musb->io.set_toggle(qh, is_out, urb);
 
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may need to clear FLUSHFIFO ... */
@@ -860,17 +837,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
 
 	/* IN/receive */
 	} else {
-		u16	csr;
+		u16 csr = 0;
 
 		if (hw_ep->rx_reinit) {
 			musb_rx_reinit(musb, qh, epnum);
+			csr |= musb->io.set_toggle(qh, is_out, urb);
 
-			/* init new state: toggle and NYET, maybe DMA later */
-			if (usb_gettoggle(urb->dev, qh->epnum, 0))
-				csr = MUSB_RXCSR_H_WR_DATATOGGLE
-					| MUSB_RXCSR_H_DATATOGGLE;
-			else
-				csr = 0;
 			if (qh->type == USB_ENDPOINT_XFER_INT)
 				csr |= MUSB_RXCSR_DISNYET;
 
@@ -933,6 +905,7 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
 	void __iomem		*epio = ep->regs;
 	struct musb_qh		*cur_qh, *next_qh;
 	u16			rx_csr, tx_csr;
+	u16			toggle;
 
 	musb_ep_select(mbase, ep->epnum);
 	if (is_in) {
@@ -970,7 +943,8 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep,
 			urb->actual_length += dma->actual_len;
 			dma->actual_len = 0L;
 		}
-		musb_save_toggle(cur_qh, is_in, urb);
+		toggle = musb->io.get_toggle(cur_qh, !is_in);
+		usb_settoggle(urb->dev, cur_qh->epnum, !is_in, toggle ? 1 : 0);
 
 		if (is_in) {
 			/* move cur_qh to end of queue */
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 8058a58..8179334 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -22,6 +22,8 @@
  * @read_fifo:	platform specific function to read fifo
  * @write_fifo:	platform specific function to write fifo
  * @busctl_offset: platform specific function to get busctl offset
+ * @get_toggle: platform specific function to get toggle
+ * @set_toggle: platform specific function to set toggle
  */
 struct musb_io {
 	u32	(*ep_offset)(u8 epnum, u16 offset);
@@ -30,6 +32,8 @@ struct musb_io {
 	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	u32	(*busctl_offset)(u8 epnum, u16 offset);
+	u16	(*get_toggle)(struct musb_qh *qh, int is_out);
+	u16	(*set_toggle)(struct musb_qh *qh, int is_out, struct urb *urb);
 };
 
 /* Do not add new entries here, add them the struct musb_io instead */
-- 
1.9.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux