Re: [PATCH 1/2] mfd: pm8x41: add support for Qualcomm 8x41 PMICs

["Ivan T. Ivanov" <iivanov@xxxxxxxxxx>]

Hi,

On Tue, 2014-04-22 at 17:31 -0700, Courtney Cavin wrote:
> From: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
> 
> The Qualcomm 8941 and 8841 PMICs are components used with the Snapdragon
> 800 series SoC family.  This driver exists largely as a glue mfd component,
> it exists to be an owner of an SPMI regmap for children devices
> described in device tree.
> 

Thanks. This is exactly what I have planed to do :-)

> Signed-off-by: Josh Cartwright <joshc@xxxxxxxxxxxxxx>
> Signed-off-by: Courtney Cavin <courtney.cavin@xxxxxxxxxxxxxx>
> ---
>  drivers/mfd/Kconfig  | 13 +++++++++++
>  drivers/mfd/Makefile |  1 +
>  drivers/mfd/pm8x41.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 77 insertions(+)
>  create mode 100644 drivers/mfd/pm8x41.c
> 

<snip>

> +
> +static int pm8x41_probe(struct spmi_device *sdev)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = devm_regmap_init_spmi_ext(sdev, &pm8x41_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_dbg(&sdev->dev, "regmap creation failed.\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	return of_platform_populate(sdev->dev.of_node, NULL, NULL, &sdev->dev);

I think that this will not going to work. For example in this particular
case, both controllers have "qcom,qpnp-revid" peripheral which is
located at offset 0x100.

And the result is:

[    0.963944] sysfs: cannot create duplicate filename '/bus/platform/devices/100.revid'

DT looks like this:

spmi {
	compatible = "qcom,spmi-pmic-arb";
	reg-names = "core", "intr", "cnfg";
	reg = <0xfc4cf000 0x1000>,
	      <0xfc4cb000 0x1000>,
	      <0xfc4ca000 0x1000>;

	interrupt-names = "periph_irq";
	interrupts = <0 190 0>;

	qcom,ee = <0>;
	qcom,channel = <0>;

	#address-cells = <2>;
	#size-cells = <0>;

	interrupt-controller;
	#interrupt-cells = <4>;

	pm8941@0 {
		compatible = "qcom,pm8941";
		reg = <0x0 SPMI_USID>;

		#address-cells = <1>;
		#size-cells = <0>;

		revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
		};
	};

	pm8841@4 {
		compatible = "qcom,pm8941";
		reg = <0x4 SPMI_USID>;

		#address-cells = <1>;
		#size-cells = <0>;

		revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
		};
	};
};

Any suggestions?

Thanks, 
Ivan

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html