Re: [RESEND PATCH v4 3/4] dt-bindings: ASoC: Add WSA881x bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for taking time to review!

On 27/08/2019 13:20, Rob Herring wrote:
On Thu, Aug 22, 2019 at 6:38 PM Srinivas Kandagatla
<srinivas.kandagatla@xxxxxxxxxx> wrote:

This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier also has a simple thermal sensor for
over temperature and speaker protection.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
  .../bindings/sound/qcom,wsa881x.yaml          | 44 +++++++++++++++++++
  1 file changed, 44 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
new file mode 100644
index 000000000000..ad718d75c660
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
+
+allOf:
+  - $ref: "soundwire-controller.yaml#"

This is not the controller, so this should not be included here. You
should get lots of warnings from doing so. You did run 'make
dt_binding_check', right?

no, I was not aware of this command! will run that before sending next version.



+
+properties:
+  compatible:
+    const: sdw10217201000
+
+  reg:
+    maxItems: 1
+
+  pd-gpios:

powerdown-gpios is the standard name.

sounds good to me, will change this in next version!

+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - pd-gpios
+  - #thermal-sensor-cells
+
+examples:
+  - |
+    efuse@1c23800 {
+        compatible = "allwinner,sun4i-a10-sid";

Huh?

Opps! copy paste bugs!!! :-)


+        reg = <0x01c23800 0x10>;
+        pd-gpios = <&wcdpinctrl 2 0>;
+        #thermal-sensor-cells = <0>;
+    };
+
+...
--
2.21.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux