[PATCH v2 07/15] dt: thermal: tsens: Document interrupt support in tsens driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Define two new required properties to define interrupts and
interrupt-names for tsens.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 673cc1831ee9d..686bede72f846 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -22,6 +22,8 @@ Required properties:
 
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
+- interrupts: Interrupts generated from Always-On subsystem (AOSS)
+- interrupt-names: Must be one of the following: "uplow", "critical"
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
@@ -40,6 +42,9 @@ tsens0: thermal-sensor@c263000 {
 		reg = <0xc263000 0x1ff>, /* TM */
 			<0xc222000 0x1ff>; /* SROT */
 		#qcom,sensors = <13>;
+		interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "uplow";
+
 		#thermal-sensor-cells = <1>;
 	};
 
@@ -51,5 +56,8 @@ tsens: thermal-sensor@4a9000 {
 		nvmem-cells = <&tsens_caldata>;
 		nvmem-cell-names = "calib";
 		#qcom,sensors = <10>;
+		interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "uplow";
+
 		#thermal-sensor-cells = <1>;
 	};
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux