On Thu, Jun 06, 2019 at 06:00:31PM +0800, Louis Kuo wrote: > This patch adds KConfig for sensor interface driver. Sensor interface > driver > is a MIPI-CSI2 host driver, namely, a HW camera interface controller. > It support a widely adopted, simple, high-speed protocol primarily > intended > for point-to-point image and video transmission between cameras and host > devices. > > Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx> > --- > drivers/media/platform/mtk-isp/Kconfig | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 drivers/media/platform/mtk-isp/Kconfig > > diff --git a/drivers/media/platform/mtk-isp/Kconfig b/drivers/media/platform/mtk-isp/Kconfig > new file mode 100644 > index 0000000..bc7fd01 > --- /dev/null > +++ b/drivers/media/platform/mtk-isp/Kconfig > @@ -0,0 +1,17 @@ > +config MTK_SENINF > + bool "Mediatek mipi csi2 driver" > + depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API > + depends on MEDIA_CAMERA_SUPPORT > + select V4L2_FWNODE > + > + default n > + help > + This driver provides a mipi-csi2 host driver used as a > + interface to connect camera with Mediatek's > + MT8183 SOCs. It is able to handle multiple cameras > + at the same time. > + > + Choose y if you want to use Mediatek SoCs to create image > + capture application such as video recording and still image > + capture. Rather than being a separate patch, this should go in with the driver. The DT bindings should precede the driver, and you'll need a MAINTAINERS entry for the driver, too. -- Sakari Ailus
