From: Rob Herring <robh@xxxxxxxxxx>
The architecture code does not need to access the internals of the FDT
blob directly, so make the pointers to it void * and use char arrays
for section variables.
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
---
v2: no change
arch/mips/include/asm/mips-boards/generic.h | 4 +---
arch/mips/include/asm/prom.h | 6 +++---
arch/mips/kernel/prom.c | 2 +-
arch/mips/lantiq/prom.c | 2 +-
arch/mips/lantiq/prom.h | 2 +-
arch/mips/mti-sead3/sead3-setup.c | 8 ++++----
arch/mips/ralink/of.c | 4 ++--
7 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h
index 4861681..b969491 100644
--- a/arch/mips/include/asm/mips-boards/generic.h
+++ b/arch/mips/include/asm/mips-boards/generic.h
@@ -67,9 +67,7 @@
extern int mips_revision_sconid;
-#ifdef CONFIG_OF
-extern struct boot_param_header __dtb_start;
-#endif
+extern char __dtb_start[];
#ifdef CONFIG_PCI
extern void mips_pcibios_init(void);
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index ccd2b75..a9494c0 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -21,13 +21,13 @@ extern void device_tree_init(void);
struct boot_param_header;
-extern void __dt_setup_arch(struct boot_param_header *bph);
+extern void __dt_setup_arch(void *bph);
#define dt_setup_arch(sym) \
({ \
- extern struct boot_param_header __dtb_##sym##_begin; \
+ extern char __dtb_##sym##_begin[]; \
\
- __dt_setup_arch(&__dtb_##sym##_begin); \
+ __dt_setup_arch(__dtb_##sym##_begin); \
})
#else /* CONFIG_OF */
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 3c3b0df..5d39bb8 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -47,7 +47,7 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
}
-void __init __dt_setup_arch(struct boot_param_header *bph)
+void __init __dt_setup_arch(void *bph)
{
if (!early_init_dt_scan(bph))
return;
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index cdea687..7447d32 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -71,7 +71,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(__dtb_start);
}
void __init device_tree_init(void)
diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h
index 8e07b5f..69a4c58 100644
--- a/arch/mips/lantiq/prom.h
+++ b/arch/mips/lantiq/prom.h
@@ -26,6 +26,6 @@ struct ltq_soc_info {
extern void ltq_soc_detect(struct ltq_soc_info *i);
extern void ltq_soc_init(void);
-extern struct boot_param_header __dtb_start;
+extern char __dtb_start[];
#endif
diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c
index bf7fe48..e43f480 100644
--- a/arch/mips/mti-sead3/sead3-setup.c
+++ b/arch/mips/mti-sead3/sead3-setup.c
@@ -69,17 +69,17 @@ static void __init parse_memsize_param(void)
if (!memsize)
return;
- offset = fdt_path_offset(&__dtb_start, "/memory");
+ offset = fdt_path_offset(__dtb_start, "/memory");
if (offset > 0) {
uint64_t new_value;
/*
* reg contains 2 32-bits BE values, offset and size. We just
* want to replace the size value without affecting the offset
*/
- prop_value = fdt_getprop(&__dtb_start, offset, "reg", &prop_len);
+ prop_value = fdt_getprop(__dtb_start, offset, "reg", &prop_len);
new_value = be64_to_cpu(*prop_value);
new_value = (new_value & ~0xffffffffllu) | memsize;
- fdt_setprop_inplace_u64(&__dtb_start, offset, "reg", new_value);
+ fdt_setprop_inplace_u64(__dtb_start, offset, "reg", new_value);
}
}
@@ -92,7 +92,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(__dtb_start);
}
void __init device_tree_init(void)
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 0170d82..91d7060 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -28,7 +28,7 @@
__iomem void *rt_sysc_membase;
__iomem void *rt_memc_membase;
-extern struct boot_param_header __dtb_start;
+extern char __dtb_start[];
__iomem void *plat_of_remap_node(const char *node)
{
@@ -63,7 +63,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(__dtb_start);
if (soc_info.mem_size)
add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
