Rahul Sharma wrote: > > The patch adds the dts files for exynos5260. > > Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> > Signed-off-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx> > Signed-off-by: Arun Kumar K <arun.kk@xxxxxxxxxxx> > Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx> Looks good to me. I will queue this 5260 SoC dtsi and 3rd xyref5260 board dt for 3.6 and I hope I can send this series with other multi-platform for exynos in this time ;-) Thanks, Kukjin > --- > arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 574 > +++++++++++++++++++++++++++++ > arch/arm/boot/dts/exynos5260.dtsi | 304 +++++++++++++++ > 2 files changed, 878 insertions(+) > create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/exynos5260.dtsi > > diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi > b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi > new file mode 100644 > index 0000000..f6ee55e > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi > @@ -0,0 +1,574 @@ > +/* > + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source > + * > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as > device > + * tree nodes are listed in this file. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#define PIN_PULL_NONE 0 > +#define PIN_PULL_DOWN 1 > +#define PIN_PULL_UP 3 > + > +&pinctrl_0 { > + gpa0: gpa0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa1: gpa1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpa2: gpa2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb0: gpb0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb1: gpb1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb2: gpb2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb3: gpb3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb4: gpb4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpb5: gpb5 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd0: gpd0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd1: gpd1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpd2: gpd2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpe0: gpe0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpe1: gpe1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf0: gpf0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpf1: gpf1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpk0: gpk0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx0: gpx0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx1: gpx1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx2: gpx2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpx3: gpx3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + uart0_data: uart0-data { > + samsung,pins = "gpa0-0", "gpa0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart0_fctl: uart0-fctl { > + samsung,pins = "gpa0-2", "gpa0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart1_data: uart1-data { > + samsung,pins = "gpa1-0", "gpa1-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart1_fctl: uart1-fctl { > + samsung,pins = "gpa1-2", "gpa1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + uart2_data: uart2-data { > + samsung,pins = "gpa1-4", "gpa1-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + spi0_bus: spi0-bus { > + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + spi1_bus: spi1-bus { > + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + usb3_vbus0_en: usb3-vbus0-en { > + samsung,pins = "gpa2-4"; > + samsung,pin-function = <1>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + i2s1_bus: i2s1-bus { > + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", > + "gpb0-4"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + pcm1_bus: pcm1-bus { > + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", > + "gpb0-4"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + spdif1_bus: spdif1-bus { > + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; > + samsung,pin-function = <4>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + spi2_bus: spi2-bus { > + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c0_hs_bus: i2c0-hs-bus { > + samsung,pins = "gpb3-0", "gpb3-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c1_hs_bus: i2c1-hs-bus { > + samsung,pins = "gpb3-2", "gpb3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c2_hs_bus: i2c2-hs-bus { > + samsung,pins = "gpb3-4", "gpb3-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c3_hs_bus: i2c3-hs-bus { > + samsung,pins = "gpb3-6", "gpb3-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c4_bus: i2c4-bus { > + samsung,pins = "gpb4-0", "gpb4-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c5_bus: i2c5-bus { > + samsung,pins = "gpb4-2", "gpb4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c6_bus: i2c6-bus { > + samsung,pins = "gpb4-4", "gpb4-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c7_bus: i2c7-bus { > + samsung,pins = "gpb4-6", "gpb4-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c8_bus: i2c8-bus { > + samsung,pins = "gpb5-0", "gpb5-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c9_bus: i2c9-bus { > + samsung,pins = "gpb5-2", "gpb5-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c10_bus: i2c10-bus { > + samsung,pins = "gpb5-4", "gpb5-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + i2c11_bus: i2c11-bus { > + samsung,pins = "gpb5-6", "gpb5-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + cam_gpio_a: cam-gpio-a { > + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", > + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", > + "gpe1-0", "gpe1-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + cam_gpio_b: cam-gpio-b { > + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", > + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; > + samsung,pin-function = <3>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + cam_i2c1_bus: cam-i2c1-bus { > + samsung,pins = "gpf0-2", "gpf0-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + cam_i2c0_bus: cam-i2c0-bus { > + samsung,pins = "gpf0-0", "gpf0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <0>; > + }; > + > + cam_spi0_bus: cam-spi0-bus { > + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > + > + cam_spi1_bus: cam-spi1-bus { > + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <0>; > + }; > +}; > + > +&pinctrl_1 { > + gpc0: gpc0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc1: gpc1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc2: gpc2 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc3: gpc3 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpc4: gpc4 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + sd0_clk: sd0-clk { > + samsung,pins = "gpc0-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_cmd: sd0-cmd { > + samsung,pins = "gpc0-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus1: sd0-bus-width1 { > + samsung,pins = "gpc0-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus4: sd0-bus-width4 { > + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_bus8: sd0-bus-width8 { > + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd0_rdqs: sd0-rdqs { > + samsung,pins = "gpc0-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_clk: sd1-clk { > + samsung,pins = "gpc1-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_cmd: sd1-cmd { > + samsung,pins = "gpc1-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus1: sd1-bus-width1 { > + samsung,pins = "gpc1-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus4: sd1-bus-width4 { > + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd1_bus8: sd1-bus-width8 { > + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_clk: sd2-clk { > + samsung,pins = "gpc2-0"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cmd: sd2-cmd { > + samsung,pins = "gpc2-1"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_NONE>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_cd: sd2-cd { > + samsung,pins = "gpc2-2"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus1: sd2-bus-width1 { > + samsung,pins = "gpc2-3"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > + > + sd2_bus4: sd2-bus-width4 { > + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; > + samsung,pin-function = <2>; > + samsung,pin-pud = <PIN_PULL_UP>; > + samsung,pin-drv = <3>; > + }; > +}; > + > +&pinctrl_2 { > + gpz0: gpz0 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + > + gpz1: gpz1 { > + gpio-controller; > + #gpio-cells = <2>; > + > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > +}; > diff --git a/arch/arm/boot/dts/exynos5260.dtsi > b/arch/arm/boot/dts/exynos5260.dtsi > new file mode 100644 > index 0000000..5398a60 > --- /dev/null > +++ b/arch/arm/boot/dts/exynos5260.dtsi > @@ -0,0 +1,304 @@ > +/* > + * SAMSUNG EXYNOS5260 SoC device tree source > + * > + * Copyright (c) 2013 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include "skeleton.dtsi" > + > +#include <dt-bindings/clock/exynos5260-clk.h> > + > +/ { > + compatible = "samsung,exynos5260", "samsung,exynos5"; > + interrupt-parent = <&gic>; > + > + aliases { > + pinctrl0 = &pinctrl_0; > + pinctrl1 = &pinctrl_1; > + pinctrl2 = &pinctrl_2; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a15"; > + reg = <0x0>; > + cci-control-port = <&cci_control1>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a15"; > + reg = <0x1>; > + cci-control-port = <&cci_control1>; > + }; > + > + cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x100>; > + cci-control-port = <&cci_control0>; > + }; > + > + cpu@101 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x101>; > + cci-control-port = <&cci_control0>; > + }; > + > + cpu@102 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x102>; > + cci-control-port = <&cci_control0>; > + }; > + > + cpu@103 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x103>; > + cci-control-port = <&cci_control0>; > + }; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clock_top: clock-controller@10010000 { > + compatible = "samsung,exynos5260-clock-top"; > + reg = <0x10010000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_peri: clock-controller@10200000 { > + compatible = "samsung,exynos5260-clock-peri"; > + reg = <0x10200000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_egl: clock-controller@10600000 { > + compatible = "samsung,exynos5260-clock-egl"; > + reg = <0x10600000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_kfc: clock-controller@10700000 { > + compatible = "samsung,exynos5260-clock-kfc"; > + reg = <0x10700000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_g2d: clock-controller@10A00000 { > + compatible = "samsung,exynos5260-clock-g2d"; > + reg = <0x10A00000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_mif: clock-controller@10CE0000 { > + compatible = "samsung,exynos5260-clock-mif"; > + reg = <0x10CE0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_mfc: clock-controller@11090000 { > + compatible = "samsung,exynos5260-clock-mfc"; > + reg = <0x11090000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_g3d: clock-controller@11830000 { > + compatible = "samsung,exynos5260-clock-g3d"; > + reg = <0x11830000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_fsys: clock-controller@122E0000 { > + compatible = "samsung,exynos5260-clock-fsys"; > + reg = <0x122E0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_aud: clock-controller@128C0000 { > + compatible = "samsung,exynos5260-clock-aud"; > + reg = <0x128C0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_isp: clock-controller@133C0000 { > + compatible = "samsung,exynos5260-clock-isp"; > + reg = <0x133C0000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_gscl: clock-controller@13F00000 { > + compatible = "samsung,exynos5260-clock-gscl"; > + reg = <0x13F00000 0x10000>; > + #clock-cells = <1>; > + }; > + > + clock_disp: clock-controller@14550000 { > + compatible = "samsung,exynos5260-clock-disp"; > + reg = <0x14550000 0x10000>; > + #clock-cells = <1>; > + }; > + > + gic: interrupt-controller@10481000 { > + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + #size-cells = <0>; > + interrupt-controller; > + reg = <0x10481000 0x1000>, > + <0x10482000 0x1000>, > + <0x10484000 0x2000>, > + <0x10486000 0x2000>; > + interrupts = <1 9 0xf04>; > + }; > + > + chipid: chipid@10000000 { > + compatible = "samsung,exynos4210-chipid"; > + reg = <0x10000000 0x100>; > + }; > + > + mct: mct@100B0000 { > + compatible = "samsung,exynos4210-mct"; > + reg = <0x100B0000 0x1000>; > + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; > + clock-names = "fin_pll", "mct"; > + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, > + <0 107 0>, <0 122 0>, <0 123 0>, > + <0 124 0>, <0 125 0>, <0 126 0>, > + <0 127 0>, <0 128 0>, <0 129 0>; > + }; > + > + cci: cci@10F00000 { > + compatible = "arm,cci-400"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x10F00000 0x1000>; > + ranges = <0x0 0x10F00000 0x6000>; > + > + cci_control0: slave-if@4000 { > + compatible = "arm,cci-400-ctrl-if"; > + interface-type = "ace"; > + reg = <0x4000 0x1000>; > + }; > + > + cci_control1: slave-if@5000 { > + compatible = "arm,cci-400-ctrl-if"; > + interface-type = "ace"; > + reg = <0x5000 0x1000>; > + }; > + }; > + > + pinctrl_0: pinctrl@11600000 { > + compatible = "samsung,exynos5260-pinctrl"; > + reg = <0x11600000 0x1000>; > + interrupts = <0 79 0>; > + > + wakeup-interrupt-controller { > + compatible = "samsung,exynos4210-wakeup-eint"; > + interrupt-parent = <&gic>; > + interrupts = <0 32 0>; > + }; > + }; > + > + pinctrl_1: pinctrl@12290000 { > + compatible = "samsung,exynos5260-pinctrl"; > + reg = <0x12290000 0x1000>; > + interrupts = <0 157 0>; > + }; > + > + pinctrl_2: pinctrl@128B0000 { > + compatible = "samsung,exynos5260-pinctrl"; > + reg = <0x128B0000 0x1000>; > + interrupts = <0 243 0>; > + }; > + > + uart0: serial@12C00000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12C00000 0x100>; > + interrupts = <0 146 0>; > + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri > PERI_SCLK_UART0>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + uart1: serial@12C10000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12C10000 0x100>; > + interrupts = <0 147 0>; > + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri > PERI_SCLK_UART1>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + uart2: serial@12C20000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12C20000 0x100>; > + interrupts = <0 148 0>; > + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri > PERI_SCLK_UART2>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + uart3: serial@12860000 { > + compatible = "samsung,exynos4210-uart"; > + reg = <0x12860000 0x100>; > + interrupts = <0 145 0>; > + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud > AUD_SCLK_AUD_UART>; > + clock-names = "uart", "clk_uart_baud0"; > + status = "disabled"; > + }; > + > + mmc_0: mmc@12140000 { > + compatible = "samsung,exynos5250-dw-mshc"; > + reg = <0x12140000 0x2000>; > + interrupts = <0 156 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top > TOP_SCLK_MMC0>; > + clock-names = "biu", "ciu"; > + fifo-depth = <64>; > + status = "disabled"; > + }; > + > + mmc_1: mmc@12150000 { > + compatible = "samsung,exynos5250-dw-mshc"; > + reg = <0x12150000 0x2000>; > + interrupts = <0 158 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top > TOP_SCLK_MMC1>; > + clock-names = "biu", "ciu"; > + fifo-depth = <64>; > + status = "disabled"; > + }; > + > + mmc_2: mmc@12160000 { > + compatible = "samsung,exynos5250-dw-mshc"; > + reg = <0x12160000 0x2000>; > + interrupts = <0 159 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top > TOP_SCLK_MMC2>; > + clock-names = "biu", "ciu"; > + fifo-depth = <64>; > + status = "disabled"; > + }; > + }; > +}; > + > +#include "exynos5260-pinctrl.dtsi" > -- > 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
