This series makes the EOQ and TCFQ operating modes of spi-fsl-dspi work when no platform IRQ is defined in the DT. The NXP LS1021A-TSN board needs this setting for performance reasons, and I am adding the corresponding DTS patch to this series to avoid runtime errors that may occur if the DTS and the driver patches part ways and get included through separate trees. The series also contains a bug fix for the shared IRQ of the DSPI driver. I am going to respin a version of it as a separate patch for inclusion in stable trees, independent of this patchset. Vladimir Oltean (5): spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours spi: spi-fsl-dspi: Remove impossible to reach error check spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode arch/arm/boot/dts/ls1021a-tsn.dts | 1 + drivers/spi/spi-fsl-dspi.c | 128 ++++++++++++++++++------------ 2 files changed, 78 insertions(+), 51 deletions(-) -- 2.17.1
