From: Andres Salomon <dilinger@xxxxxxxxxx>
On mmp3, there's an extra set of ICU registers (ICU2) that handle
interrupts on the extra cores. When masking off interrupts on MP1,
these should be masked as well.
We add a new interrupt controller via device tree to identify when we're
looking at an mmp3 machine via compatible field of "marvell,mmp3-intc".
[lkundrak@xxxxx: Changed "mrvl,mmp3-intc" compatible strings to
"marvell,mmp3-intc". Tidied up the subject line a bit.]
Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxx>
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
--
Changes since v1:
- Moved mmp3-specific mmp_icu2_base initialization from mmp_init_bases() to
mmp3_of_init() so that we don't have to check for marvell,mmp3-intc
compatibility twice.
- Drop an superfluous call to irq_set_default_host()
arch/arm/mach-mmp/regs-icu.h | 3 +++
drivers/irqchip/irq-mmp.c | 48 ++++++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
index 0375d5a7fcb2b..410743d2b4020 100644
--- a/arch/arm/mach-mmp/regs-icu.h
+++ b/arch/arm/mach-mmp/regs-icu.h
@@ -11,6 +11,9 @@
#define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000)
#define ICU_REG(x) (ICU_VIRT_BASE + (x))
+#define ICU2_VIRT_BASE (AXI_VIRT_BASE + 0x84000)
+#define ICU2_REG(x) (ICU2_VIRT_BASE + (x))
+
#define ICU_INT_CONF(n) ICU_REG((n) << 2)
#define ICU_INT_CONF_MASK (0xf)
diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 126ffdbffdddf..25848d73f6792 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -44,6 +44,7 @@ struct icu_chip_data {
unsigned int conf_enable;
unsigned int conf_disable;
unsigned int conf_mask;
+ unsigned int conf2_mask;
unsigned int clr_mfp_irq_base;
unsigned int clr_mfp_hwirq;
struct irq_domain *domain;
@@ -53,9 +54,11 @@ struct mmp_intc_conf {
unsigned int conf_enable;
unsigned int conf_disable;
unsigned int conf_mask;
+ unsigned int conf2_mask;
};
static void __iomem *mmp_icu_base;
+static void __iomem *mmp_icu2_base;
static struct icu_chip_data icu_data[MAX_ICU_NR];
static int max_icu_nr;
@@ -98,6 +101,16 @@ static void icu_mask_irq(struct irq_data *d)
r &= ~data->conf_mask;
r |= data->conf_disable;
writel_relaxed(r, mmp_icu_base + (hwirq << 2));
+
+ if (data->conf2_mask) {
+ /*
+ * ICU1 (above) only controls PJ4 MP1; if using SMP,
+ * we need to also mask the MP2 and MM cores via ICU2.
+ */
+ r = readl_relaxed(mmp_icu2_base + (hwirq << 2));
+ r &= ~data->conf2_mask;
+ writel_relaxed(r, mmp_icu2_base + (hwirq << 2));
+ }
} else {
r = readl_relaxed(data->reg_mask) | (1 << hwirq);
writel_relaxed(r, data->reg_mask);
@@ -201,6 +214,14 @@ static const struct mmp_intc_conf mmp2_conf = {
MMP2_ICU_INT_ROUTE_PJ4_FIQ,
};
+static struct mmp_intc_conf mmp3_conf = {
+ .conf_enable = 0x20,
+ .conf_disable = 0x0,
+ .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ |
+ MMP2_ICU_INT_ROUTE_PJ4_FIQ,
+ .conf2_mask = 0xf0,
+};
+
static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
{
int hwirq;
@@ -428,6 +449,33 @@ static int __init mmp2_of_init(struct device_node *node,
}
IRQCHIP_DECLARE(mmp2_intc, "mrvl,mmp2-intc", mmp2_of_init);
+static int __init mmp3_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ int ret;
+
+ mmp_icu2_base = of_iomap(node, 1);
+ if (!mmp_icu2_base) {
+ pr_err("Failed to get interrupt controller register #2\n");
+ return -ENODEV;
+ }
+
+ ret = mmp_init_bases(node);
+ if (ret < 0) {
+ iounmap(mmp_icu2_base);
+ return ret;
+ }
+
+ icu_data[0].conf_enable = mmp3_conf.conf_enable;
+ icu_data[0].conf_disable = mmp3_conf.conf_disable;
+ icu_data[0].conf_mask = mmp3_conf.conf_mask;
+ icu_data[0].conf2_mask = mmp3_conf.conf2_mask;
+ set_handle_irq(mmp2_handle_irq);
+ max_icu_nr = 1;
+ return 0;
+}
+IRQCHIP_DECLARE(mmp3_intc, "marvell,mmp3-intc", mmp3_of_init);
+
static int __init mmp2_mux_of_init(struct device_node *node,
struct device_node *parent)
{
--
2.21.0
