[PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The BG2Q has an AHCI SATA controller. Add the corresponding node
in its device tree.

Signed-off-by: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/berlin2q.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..8e58aae73365 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -183,6 +183,18 @@
 			};
 		};
 
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin-ahci";
+			reg = <0xe90000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disable";
+		};
+
+		generic-regs@ea0110 {
+			compatible = "marvell,berlin-generic-regs", "syscon";
+			reg = <0xea0110 0x10>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux