Hi Christian, thanks for testing on this 3 boards. guillaume On 8/14/19 2:24 PM, Christian Hewitt wrote: > On 6 Aug 2019, at 5:05 pm, Guillaume La Roque <glaroque@xxxxxxxxxxxx> wrote: >> This patchs series add support of New Amlogic temperature sensor and minimal >> thermal zone for SEI510 and ODROID-N2 boards. >> >> First implementation was doing on IIO[1] but after comments i move on thermal framework. >> Formulas and calibration values come from amlogic. >> >> Changes since v2: >> - fix yaml documention >> - remove unneeded status variable for temperature-sensor node >> - rework driver after Martin review >> - add some information in commit message >> >> Changes since v1: >> - fix enum vs const in documentation >> - fix error with thermal-sensor-cells value set to 1 instead of 0 >> - add some dependencies needed to add cooling-maps >> >> Dependencies : >> - patch 3,4 & 5: depends on Neil's patch and series : >> - missing dwc2 phy-names[2] >> - patchsets to add DVFS on G12a[3] which have deps on [4] and [5] >> >> [1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@xxxxxxxxxxxx/ >> [2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@xxxxxxxxxxxx/ >> [3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@xxxxxxxxxxxx/ >> [4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@xxxxxxxxxxxx/ >> [5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@xxxxxxxxxxxx/ >> >> Guillaume La Roque (6): >> dt-bindings: thermal: Add DT bindings documentation for Amlogic >> Thermal >> thermal: amlogic: Add thermal driver to support G12 SoCs >> arm64: dts: amlogic: g12: add temperature sensor >> arm64: dts: meson: sei510: Add minimal thermal zone >> arm64: dts: amlogic: odroid-n2: add minimal thermal zone >> MAINTAINERS: add entry for Amlogic Thermal driver > Tested-by: Christian Hewitt <christianshewitt@xxxxxxxxx> > > I’ve tested this series with Odroid N2 and Khadas VIM3, X96-Max. Patches to add > support for VIM3/X96-max will be submitted once the driver is merged. > > VIM3:~ # dmesg | grep thermal > [ 0.046375] thermal_sys: Registered thermal governor 'step_wise' > > VIM3:~ # cat /sys/devices/virtual/thermal/thermal_zone0/temp > 51300 > > VIM3:~ # cat /sys/devices/virtual/thermal/thermal_zone1/temp > 52800 > > Christian
