On Tue, Aug 20, 2019 at 10:55 PM Vinod Koul <vkoul@xxxxxxxxxx> wrote:
>
> Add hwlock, pmu, smem, tcsr_mutex_regs, apss_shared mailbox, apps_rsc
> including the rpmhcc child nodes to the SM8150 DTSI
>
> Co-developed-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 63 ++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 3bed04d60dea..781905e9977a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -144,12 +144,23 @@
> };
> };
>
> + tcsr_mutex: hwlock {
> + compatible = "qcom,tcsr-mutex";
> + syscon = <&tcsr_mutex_regs 0 0x1000>;
> + #hwlock-cells = <1>;
> + };
> +
> memory@80000000 {
> device_type = "memory";
> /* We expect the bootloader to fill in the size */
> reg = <0x0 0x80000000 0x0 0x0>;
> };
>
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> psci {
> compatible = "arm,psci-1.0";
> method = "smc";
> @@ -266,6 +277,12 @@
> };
> };
>
> + smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_mem>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> soc: soc@0 {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -305,6 +322,11 @@
> };
> };
>
> + tcsr_mutex_regs: syscon@1f40000 {
> + compatible = "syscon";
> + reg = <0x01f40000 0x40000>;
> + };
> +
> tlmm: pinctrl@3100000 {
> compatible = "qcom,sm8150-pinctrl";
> reg = <0x03100000 0x300000>,
> @@ -320,6 +342,16 @@
> #interrupt-cells = <2>;
> };
>
> + aoss_qmp: power-controller@c300000 {
> + compatible = "qcom,sm8150-aoss-qmp";
> + reg = <0x0c300000 0x100000>;
> + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&apss_shared 0>;
> +
> + #clock-cells = <0>;
> + #power-domain-cells = <1>;
> + };
> +
> intc: interrupt-controller@17a00000 {
> compatible = "arm,gic-v3";
> interrupt-controller;
> @@ -329,6 +361,12 @@
> interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + apss_shared: mailbox@17c00000 {
> + compatible = "qcom,sm8150-apss-shared";
> + reg = <0x17c00000 0x1000>;
> + #mbox-cells = <1>;
> + };
> +
> timer@17c20000 {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -388,6 +426,31 @@
> };
> };
>
> + apps_rsc: rsc@18200000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x18200000 0x10000>,
> + <0x18210000 0x10000>,
> + <0x18220000 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>,
> + <SLEEP_TCS 1>,
> + <WAKE_TCS 1>,
> + <CONTROL_TCS 0>;
> +
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8150-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
> + };
> +
> spmi_bus: spmi@c440000 {
Sort by address here.
> compatible = "qcom,spmi-pmic-arb";
> reg = <0x0c440000 0x0001100>,
> --
> 2.20.1
>
