Re: [PATCH] ARM: dts: rockchip: remove rk3288 fennec board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2019/8/20 下午9:56, Heiko Stuebner wrote:
Hi Kever,

Am Dienstag, 20. August 2019, 12:03:52 CEST schrieb Kever Yang:
Since there is no one using this board, remove it.
so just to elaborate a bit, I guess this board was internal to Rockchip,
never went to the market and therefore is obsolete without any users,
right?


Yes, even if there is someone using this board, they don't use upstream source code, you can see

there is only one commit relate to board itself, but never update. So I would like to remove it

from kernel and U-Boot upstream.


Also we should remove the binding  from
	Documentation/devicetree/bindings/arm/rockchip.yaml as well

Will update.


Thanks,

- Kever



Heiko


Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---

  arch/arm/boot/dts/rk3288-fennec.dts | 347 ----------------------------
  1 file changed, 347 deletions(-)
  delete mode 100644 arch/arm/boot/dts/rk3288-fennec.dts

diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
deleted file mode 100644
index 4847cf902a15..000000000000
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ /dev/null
@@ -1,347 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-
-/dts-v1/;
-
-#include "rk3288.dtsi"
-
-/ {
-	model = "Rockchip RK3288 Fennec Board";
-	compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
-
-	memory@0 {
-		reg = <0x0 0x0 0x0 0x80000000>;
-		device_type = "memory";
-	};
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-	};
-
-	vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
-	bus-width = <8>;
-	cap-mmc-highspeed;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
-	status = "okay";
-};
-
-&gmac {
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	clock_in_out = "input";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "okay";
-};
-
-&gpu {
-	mali-supply = <&vdd_gpu>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		reg = <0x1b>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
-		#clock-cells = <1>;
-		clock-output-names = "xin32k", "rk808-clkout2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &global_pwroff>;
-		rockchip,system-power-controller;
-		wakeup-source;
-
-		vcc1-supply = <&vcc_sys>;
-		vcc2-supply = <&vcc_sys>;
-		vcc3-supply = <&vcc_sys>;
-		vcc4-supply = <&vcc_sys>;
-		vcc6-supply = <&vcc_sys>;
-		vcc7-supply = <&vcc_sys>;
-		vcc8-supply = <&vcc_io>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc11-supply = <&vcc_io>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vcc_io>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-name = "vdd_arm";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_pmu: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_pmu";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcca_33: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_33";
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_wl: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_wl";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc18_lcd: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_sd";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_lan: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_lan";
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&pinctrl {
-	pcfg_output_high: pcfg-output-high {
-		output-high;
-	};
-
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
-		drive-strength = <8>;
-	};
-
-	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
-		bias-pull-up;
-		drive-strength = <8>;
-	};
-
-	gmac {
-		phy_int: phy-int {
-			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_pmeb: phy-pmeb {
-			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-
-		phy_rst: phy-rst {
-			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
-		};
-	};
-
-	pmic {
-		pmic_int: pmic-int {
-			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usbphy {
-		host_drv: host-drv {
-			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&host_drv>;
-	vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host1 {
-	status = "okay";
-};
-
-&usb_otg {
-	status = "okay";
-};
-
-&usb_hsic {
-	status = "okay";
-};
-
-&vopb {
-	status = "okay";
-};
-
-&vopb_mmu {
-	status = "okay";
-};
-
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};










[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux