On 20-08-19, 14:26, Niklas Cassel wrote:
> On Tue, Aug 20, 2019 at 12:12:13PM +0530, Vinod Koul wrote:
> > This add base DTS file for sm8150-mtp and enables boot to console, adds
> > tlmm reserved range, resin node, volume down key and also includes pmic
> > file.
> >
> > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/Makefile | 1 +
> > arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 48 +++++++++++++++++++++++++
> > 2 files changed, 49 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> >
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index 0a7e5dfce6f7..1964dacaf19b 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -12,5 +12,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> > diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> > new file mode 100644
> > index 000000000000..80b15f4f07c8
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> > @@ -0,0 +1,48 @@
> > +// SPDX-License-Identifier: BSD-3-Clause
> > +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> > +// Copyright (c) 2019, Linaro Limited
> > +
> > +/dts-v1/;
> > +
> > +#include "sm8150.dtsi"
> > +#include "pm8150.dtsi"
> > +#include "pm8150b.dtsi"
> > +#include "pm8150l.dtsi"
> > +
> > +/ {
> > + model = "Qualcomm Technologies, Inc. SM8150 MTP";
> > + compatible = "qcom,sm8150-mtp";
> > +
> > + aliases {
> > + serial0 = &uart2;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +};
> > +
> > +&qupv3_id_1 {
> > + status = "okay";
> > +};
> > +
> > +&pon {
> > + pwrkey {
> > + status = "okay";
> > + };
> > +
> > + resin {
> > + compatible = "qcom,pm8941-resin";
> > + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> > + debounce = <15625>;
> > + bias-pull-up;
> > + linux,code = <KEY_VOLUMEDOWN>;
> > + };
> > +};
>
> Missing a newline here.
Yup will updated
--
~Vinod
