From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> The Allwinner A10 CMOS Sensor Interface is a camera capture interface also used in later (A10s, A13, A20, R8 and GR8) SoCs. On some SoCs, like the A10, there's multiple instances of that controller, with one instance supporting more channels and having an ISP. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> --- Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml new file mode 100644 index 000000000000..9000bca344f9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@xxxxxxxx> + - Maxime Ripard <maxime.ripard@xxxxxxxxxxx> + +description: |- + The Allwinner A10 and later has a CMOS Sensor Interface to retrieve + frames from a parallel or BT656 sensor. + +properties: + compatible: + const: allwinner,sun7i-a20-csi0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The CSI interface clock + - description: The CSI module clock + - description: The CSI ISP clock + - description: The CSI DRAM clock + + clock-names: + items: + - const: bus + - const: mod + - const: isp + - const: ram + + resets: + maxItems: 1 + + port: + type: object + additionalProperties: false + + properties: + endpoint: + properties: + bus-width: + const: 8 + description: Number of data lines actively used. + + data-active: true + hsync-active: true + pclk-sample: true + remote-endpoint: true + vsync-active: true + + required: + - bus-width + - data-active + - hsync-active + - pclk-sample + - remote-endpoint + - vsync-active + + required: + - endpoint + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun7i-a20-ccu.h> + #include <dt-bindings/reset/sun4i-a10-ccu.h> + + csi0: csi@1c09000 { + compatible = "allwinner,sun7i-a20-csi0"; + reg = <0x01c09000 0x1000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>, + <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "mod", "isp", "ram"; + resets = <&ccu RST_CSI0>; + + port { + csi_from_ov5640: endpoint { + remote-endpoint = <&ov5640_to_csi>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + +... -- git-series 0.9.1
