From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> The older Allwinner SoCs have a IR receiver supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> --- .../media/allwinner,sun4i-a10-ir.yaml | 80 +++++++++++++++++++ .../devicetree/bindings/media/sunxi-ir.txt | 35 -------- 2 files changed, 80 insertions(+), 35 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml delete mode 100644 Documentation/devicetree/bindings/media/sunxi-ir.txt diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml new file mode 100644 index 000000000000..98c1bdde9a86 --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Infrared Controller Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@xxxxxxxx> + - Maxime Ripard <maxime.ripard@xxxxxxxxxxx> + +allOf: + - $ref: "rc.yaml#" + +properties: + compatible: + oneOf: + - const: allwinner,sun4i-a10-ir + - const: allwinner,sun5i-a13-ir + - items: + - const: allwinner,sun8i-a83t-ir + - const: allwinner,sun6i-a31-ir + - const: allwinner,sun6i-a31-ir + - items: + - const: allwinner,sun50i-a64-ir + - const: allwinner,sun6i-a31-ir + - items: + - const: allwinner,sun50i-h6-ir + - const: allwinner,sun6i-a31-ir + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: ir + + resets: + maxItems: 1 + + clock-frequency: + default: 8000000 + description: + IR Receiver clock frequency, in Hertz. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +examples: + - | + ir0: ir@1c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + clock-frequency = <3000000>; + resets = <&apb0_rst 1>; + interrupts = <0 5 1>; + reg = <0x01C21800 0x40>; + linux,rc-map-name = "rc-rc6-mce"; + }; + +... diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt deleted file mode 100644 index 81eaf95fb764..000000000000 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ /dev/null @@ -1,35 +0,0 @@ -Device-Tree bindings for SUNXI IR controller found in sunXi SoC family - -Required properties: -- compatible : - "allwinner,sun4i-a10-ir" - "allwinner,sun5i-a13-ir" - "allwinner,sun6i-a31-ir" - "allwinner,sun50i-a64-ir", "allwinner,sun6i-a31-ir" - "allwinner,sun50i-h6-ir", "allwinner,sun6i-a31-ir" -- clocks : list of clock specifiers, corresponding to - entries in clock-names property; -- clock-names : should contain "apb" and "ir" entries; -- interrupts : should contain IR IRQ number; -- reg : should contain IO map address for IR. - -Required properties since A31: -- resets : phandle + reset specifier pair - -Optional properties: -- linux,rc-map-name: see rc.txt file in the same directory. -- clock-frequency : IR Receiver clock frequency, in Hertz. Defaults to 8 MHz - if missing. - -Example: - -ir0: ir@1c21800 { - compatible = "allwinner,sun4i-a10-ir"; - clocks = <&apb0_gates 6>, <&ir0_clk>; - clock-names = "apb", "ir"; - clock-frequency = <3000000>; - resets = <&apb0_rst 1>; - interrupts = <0 5 1>; - reg = <0x01C21800 0x40>; - linux,rc-map-name = "rc-rc6-mce"; -}; -- 2.21.0
