Re: [PATCH 07/15] dt: thermal: tsens: Document interrupt support in tsens driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 26, 2019 at 03:48:42AM +0530, Amit Kucheria wrote:
> Define two new required properties to define interrupts and
> interrupt-names for tsens.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 673cc1831ee9..3d3dd5dc6d36 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -22,6 +22,8 @@ Required properties:
>  
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
>  - #qcom,sensors: Number of sensors in tsens block
> +- interrupts: Interrupts generated from Always-On subsystem (AOSS)
> +- interrupt-names: The name of the interrupt e.g. "tsens0", "tsens1"

How many interrupts? A name with just indices isn't too useful.

>  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
>  nvmem cells
>  
> @@ -40,6 +42,9 @@ tsens0: thermal-sensor@c263000 {
>  		reg = <0xc263000 0x1ff>, /* TM */
>  			<0xc222000 0x1ff>; /* SROT */
>  		#qcom,sensors = <13>;
> +		interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tsens0";
> +
>  		#thermal-sensor-cells = <1>;
>  	};
>  
> -- 
> 2.17.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux