[PATCH 2/2] watchdog: aspeed: Add support for AST2600

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>

The ast2600 can be supported by the same code as the ast2500.

Signed-off-by: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
 drivers/watchdog/aspeed_wdt.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index cc71861e033a..94f73796ba9d 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -31,9 +31,14 @@ static const struct aspeed_wdt_config ast2500_config = {
 	.ext_pulse_width_mask = 0xfffff,
 };
 
+static const struct aspeed_wdt_config ast2600_config = {
+	.ext_pulse_width_mask = 0xfffff,
+};
+
 static const struct of_device_id aspeed_wdt_of_table[] = {
 	{ .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
 	{ .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-wdt", .data = &ast2600_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
@@ -259,7 +264,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
 	}
 
-	if (of_device_is_compatible(np, "aspeed,ast2500-wdt")) {
+	if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) ||
+		(of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
 		u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
 
 		reg &= config->ext_pulse_width_mask;
-- 
2.23.0.rc1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux