[PATCH v2 3/3] arm64: allwinner: h6: add i2c0 node in PineH64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



i2c0 bus is exposed by PI-2 BUS in the PineH64, model B.

Signed-off-by: Bhushan Shah <bshah@xxxxxxx>
---
Changes in v2:
  - Don't enable the i2c0 node in PineH64 by default

 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 684d1daa3081..97d9b7c63fb3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -160,6 +160,15 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
+/* This i2c interface is exposed on PI-2 BUS, Pin 3 (I2C_SDA) and 5 (I2C_SCL) */
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
 &r_i2c {
 	status = "okay";
 
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux