This series adds the Berlin BG2Q SDHCI nodes to support the 3 controllers available. The Berlin BG2Q SDHCI controllers are compatible with the pxav3 driver. This patches also enable the SD Card reader and the eMMC of the BG2Q DMP. This series applies on top of Alexandre's patches for the Berlin's pll: https://patchwork.kernel.org/patch/3890341/ https://patchwork.kernel.org/patch/3876271/ Changes since v1: The v2 introduced a custom Berlin SDHCI driver. It turns out the available pxav3 driver was compatible with the BG2Q SDHCI controllers. - removed the unneeded custom driver - switched to the pxav3 driver - removed the board specific properties from the SoC device tree Antoine Ténart (2): ARM: dts: berlin: add the SDHCI nodes for the BG2Q ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 11 ++++++++++ arch/arm/boot/dts/berlin2q.dtsi | 32 ++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
