Re: [PATCH 2/2] interconnect: qcom: Add OSM L3 interconnect provider support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Evan,

Thanks for the review!

On 2019-08-14 02:02, Evan Green wrote:
Hi Sibi,

On Wed, Aug 7, 2019 at 4:24 AM Sibi Sankar <sibis@xxxxxxxxxxxxxx> wrote:

On some Qualcomm SoCs, Operating State Manager (OSM) controls the
resources of scaling L3 caches. Add a driver to handle bandwidth
requests to OSM L3 from CPU/GPU.

Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>

This looks good to me, just a couple minor comments below.

---
 drivers/interconnect/qcom/Kconfig  |   7 +
 drivers/interconnect/qcom/Makefile |   2 +
drivers/interconnect/qcom/osm-l3.c | 292 +++++++++++++++++++++++++++++
 3 files changed, 301 insertions(+)
 create mode 100644 drivers/interconnect/qcom/osm-l3.c

diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index d5e70ebc24108..f6c2a11a1a2c9 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -5,6 +5,13 @@ config INTERCONNECT_QCOM
        help
Support for Qualcomm's Network-on-Chip interconnect hardware.

+config INTERCONNECT_QCOM_OSM_L3
+       tristate "Qualcomm OSM L3 interconnect driver"
+       depends on INTERCONNECT_QCOM || COMPILE_TEST
+       help
+ Say y here to support the Operating State Manager (OSM) interconnect + driver which controls the scaling of L3 caches on Qualcomm SoCs.
+
 config INTERCONNECT_QCOM_SDM845
        tristate "Qualcomm SDM845 interconnect driver"
        depends on INTERCONNECT_QCOM
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
index 1c1cea690f922..9078af5fed109 100644
--- a/drivers/interconnect/qcom/Makefile
+++ b/drivers/interconnect/qcom/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0

+icc-osm-l3-objs                                := osm-l3.o
 qnoc-sdm845-objs                       := sdm845.o

+obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SDM845) += qnoc-sdm845.o
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
new file mode 100644
index 0000000000000..1e7dfce6f4f9b
--- /dev/null
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/interconnect-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define LUT_MAX_ENTRIES                        40U
+#define LUT_SRC                                GENMASK(31, 30)
+#define LUT_L_VAL                      GENMASK(7, 0)
+#define LUT_ROW_SIZE                   32
+#define CLK_HW_DIV                     2
+
+/* Register offsets */
+#define REG_ENABLE                     0x0
+#define REG_FREQ_LUT                   0x110
+#define REG_PERF_STATE                 0x920
+
+#define OSM_L3_MAX_LINKS               1
+
+#define to_qcom_provider(_provider) \
+       container_of(_provider, struct qcom_icc_provider, provider)
+
+enum {
+       SDM845_MASTER_OSM_L3_APPS = SLAVE_TCU + 1,
+       SDM845_MASTER_OSM_L3_GPU,
+       SDM845_SLAVE_OSM_L3,
+};
+
+struct qcom_icc_provider {

Maybe we should rename this and the ones below to avoid collisions
with drivers/interconnect/qcom/sdm845.c, even though those structures
are currently local.

sure I'll do that


+       void __iomem *base;
+       unsigned int max_state;
+       unsigned long lut_tables[LUT_MAX_ENTRIES];
+       struct icc_provider provider;
+};
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @links: an array of nodes where we can go next while traversing
+ * @id: a unique node identifier
+ * @num_links: the total number of @links
+ * @buswidth: width of the interconnect between a node and the bus
+ */
+struct qcom_icc_node {
+       const char *name;
+       u16 links[OSM_L3_MAX_LINKS];
+       u16 id;
+       u16 num_links;
+       u16 buswidth;
+};
+
+struct qcom_icc_desc {
+       struct qcom_icc_node **nodes;
+       size_t num_nodes;
+};
+
+#define DEFINE_QNODE(_name, _id, _buswidth, ...) \ + static struct qcom_icc_node _name = { \ + .name = #_name, \ + .id = _id, \ + .buswidth = _buswidth, \ + .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ + .links = { __VA_ARGS__ }, \
+       }
+
+DEFINE_QNODE(osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3); +DEFINE_QNODE(osm_gpu_l3, SDM845_MASTER_OSM_L3_GPU, 16, SDM845_SLAVE_OSM_L3);
+DEFINE_QNODE(osm_l3, SDM845_SLAVE_OSM_L3, 16);
+
+static struct qcom_icc_node *sdm845_osm_l3_nodes[] = {
+       [MASTER_OSM_L3_APPS] = &osm_apps_l3,
+       [MASTER_OSM_L3_GPU] = &osm_gpu_l3,
+       [SLAVE_OSM_L3] = &osm_l3,
+};
+
+static struct qcom_icc_desc sdm845_osm_l3 = {
+       .nodes = sdm845_osm_l3_nodes,
+       .num_nodes = ARRAY_SIZE(sdm845_osm_l3_nodes),
+};
+
+static int qcom_icc_aggregate(struct icc_node *node, u32 avg_bw,
+ u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+       *agg_avg += avg_bw;
+       *agg_peak = max_t(u32, *agg_peak, peak_bw);
+
+       return 0;
+}
+
+static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+       struct icc_provider *provider;
+       struct qcom_icc_provider *qp;
+       struct qcom_icc_node *qn;
+       struct icc_node *n;
+       unsigned int index;
+       u32 agg_peak = 0;
+       u32 agg_avg = 0;
+       u64 rate;
+
+       qn = src->data;
+       provider = src->provider;
+       qp = to_qcom_provider(provider);
+
+       list_for_each_entry(n, &provider->nodes, node_list)
+               qcom_icc_aggregate(n, n->avg_bw, n->peak_bw,
+                                  &agg_avg, &agg_peak);
+
+       rate = max(agg_avg, agg_peak);
+       rate = icc_units_to_bps(rate);
+       do_div(rate, qn->buswidth);
+
+       for (index = 0; index < qp->max_state; index++) {
+               if (qp->lut_tables[index] >= rate)
+                       break;
+       }
+
+       writel_relaxed(index, qp->base + REG_PERF_STATE);
+
+       return 0;
+}
+
+static int qcom_osm_l3_probe(struct platform_device *pdev)
+{
+       u32 info, src, lval, i, prev_freq = 0, freq;
+       static unsigned long hw_rate, xo_rate;
+       const struct qcom_icc_desc *desc;
+       struct icc_onecell_data *data;
+       struct icc_provider *provider;
+       struct qcom_icc_node **qnodes;
+       struct qcom_icc_provider *qp;
+       struct icc_node *node;
+       size_t num_nodes;
+       struct clk *clk;
+       int ret;
+
+       clk = clk_get(&pdev->dev, "xo");
+       if (IS_ERR(clk))
+               return PTR_ERR(clk);
+
+       xo_rate = clk_get_rate(clk);
+       clk_put(clk);
+
+       clk = clk_get(&pdev->dev, "alternate");
+       if (IS_ERR(clk))
+               return PTR_ERR(clk);
+
+       hw_rate = clk_get_rate(clk) / CLK_HW_DIV;
+       clk_put(clk);
+
+       qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
+       if (!qp)
+               return -ENOMEM;
+
+       qp->base = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(qp->base))
+               return PTR_ERR(qp->base);
+
+       /* HW should be in enabled state to proceed */
+       if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) {
+               dev_err(&pdev->dev, "error hardware not enabled\n");
+               return -ENODEV;
+       }
+
+       for (i = 0; i < LUT_MAX_ENTRIES; i++) {
+               info = readl_relaxed(qp->base + REG_FREQ_LUT +
+                                    i * LUT_ROW_SIZE);
+               src = FIELD_GET(LUT_SRC, info);
+               lval = FIELD_GET(LUT_L_VAL, info);
+               if (src)
+                       freq = xo_rate * lval;
+               else
+                       freq = hw_rate;
+
+               /*
+ * Two of the same frequencies with the same core counts means
+                * end of table
+                */
+               if (i > 0 && prev_freq == freq)
+                       break;
+
+               qp->lut_tables[i] = freq;
+               prev_freq = freq;
+       }
+       qp->max_state = i;
+
+       desc = of_device_get_match_data(&pdev->dev);
+       if (!desc)
+               return -EINVAL;
+
+       qnodes = desc->nodes;
+       num_nodes = desc->num_nodes;
+
+ data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
+       if (!data)
+               return -ENOMEM;
+
+       provider = &qp->provider;
+       provider->dev = &pdev->dev;
+       provider->set = qcom_icc_set;
+       provider->aggregate = qcom_icc_aggregate;
+       provider->xlate = of_icc_xlate_onecell;
+       INIT_LIST_HEAD(&provider->nodes);
+       provider->data = data;
+
+       ret = icc_provider_add(provider);
+       if (ret) {
+ dev_err(&pdev->dev, "error adding interconnect provider\n");
+               return ret;
+       }
+
+       for (i = 0; i < num_nodes; i++) {
+               size_t j;
+
+               node = icc_node_create(qnodes[i]->id);
+               if (IS_ERR(node)) {
+                       ret = PTR_ERR(node);
+                       goto err;
+               }
+
+               node->name = qnodes[i]->name;
+               node->data = qnodes[i];
+               icc_node_add(node, provider);
+
+ dev_dbg(&pdev->dev, "registered node %p %s %d\n", node,
+                       qnodes[i]->name, node->id);
+
+               /* populate links */
+               for (j = 0; j < qnodes[i]->num_links; j++)
+                       icc_link_create(node, qnodes[i]->links[j]);
+
+               data->nodes[i] = node;
+       }
+       data->num_nodes = num_nodes;
+
+       platform_set_drvdata(pdev, qp);
+
+       return ret;
+err:
+       list_for_each_entry(node, &provider->nodes, node_list) {
+               icc_node_del(node);
+               icc_node_destroy(node->id);
+       }
+
+       icc_provider_del(provider);

I looks like you could just call qcom_osm_l3_remove() here instead of the above.

yeah



+       return ret;
+}
+
+static int qcom_osm_l3_remove(struct platform_device *pdev)
+{
+       struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
+       struct icc_provider *provider = &qp->provider;
+       struct icc_node *n;
+
+       list_for_each_entry(n, &provider->nodes, node_list) {
+               icc_node_del(n);
+               icc_node_destroy(n->id);
+       }
+
+       return icc_provider_del(provider);
+}
+
+static const struct of_device_id osm_l3_of_match[] = {
+ { .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_osm_l3 },
+       { },
+};
+MODULE_DEVICE_TABLE(of, osm_l3_of_match);
+
+static struct platform_driver osm_l3_driver = {
+       .probe = qcom_osm_l3_probe,
+       .remove = qcom_osm_l3_remove,
+       .driver = {
+               .name = "osm-l3",
+               .of_match_table = osm_l3_of_match,
+       },
+};
+module_platform_driver(osm_l3_driver);
+
+MODULE_DESCRIPTION("Qualcomm OSM L3 interconnect driver");
+MODULE_LICENSE("GPL v2");
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


--
-- Sibi Sankar --
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux