On Wed, Aug 14, 2019 at 12:22:08PM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@xxxxxxxx>
>
> The DWMAC binding never supported having the Ethernet PHY node as a
> direct child to the controller, nor did it support the "phy" property
> as a way to specify which Ethernet PHY to use. What seemed to work
> was simply the implementation ignoring the "phy" property and instead
> probing all addresses on the MDIO bus and using the first available
> one.
>
> The recent switch from "phy" to "phy-handle" breaks the assumptions
> of the implementation, and does not match what the binding requires.
> The binding requires that if an MDIO bus is described, it shall be
> a sub-node with the "snps,dwmac-mdio" compatible string.
>
> Add a device node for the MDIO bus, and move the Ethernet PHY node
> under it. Also fix up the #address-cells and #size-cells properties
> where needed.
>
> Fixes: de332de26d19 ("ARM: dts: sunxi: Switch from phy to phy-handle")
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Applied, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
