The new BCM2711 supports an additional clock for the emmc2 block. So we need an additional compatible. Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx> Acked-by: Eric Anholt <eric@xxxxxxxxxx> --- Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt | 4 +++- include/dt-bindings/clock/bcm2835.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt index dd906db..9e0b03a 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -12,7 +12,9 @@ clock generators, but a few (like the ARM or HDMI) will source from the PLL dividers directly. Required properties: -- compatible: Should be "brcm,bcm2835-cprman" +- compatible: should be one of the following, + "brcm,bcm2711-cprman" + "brcm,bcm2835-cprman" - #clock-cells: Should be <1>. The permitted clock-specifier values can be found in include/dt-bindings/clock/bcm2835.h - reg: Specifies base physical address and size of the registers diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h index 2cec01f..b60c0343 100644 --- a/include/dt-bindings/clock/bcm2835.h +++ b/include/dt-bindings/clock/bcm2835.h @@ -58,3 +58,5 @@ #define BCM2835_CLOCK_DSI1E 48 #define BCM2835_CLOCK_DSI0P 49 #define BCM2835_CLOCK_DSI1P 50 + +#define BCM2711_CLOCK_EMMC2 51 -- 2.7.4
