On 26/07/2019 00:18, Amit Kucheria wrote:
> msm8916 uses sensors 0, 1, 2, 4 and 5. Sensor 3 is NOT used. Fixup the
> device tree so that the correct sensor ID is used and as a result we can
> actually check the temperature for the cpu2_3 sensor.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
This change matches the documentation available in the Qcom website.
Reviewed-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 5ea9fb8f2f87..8686e101905c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -179,7 +179,7 @@
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> - thermal-sensors = <&tsens 4>;
> + thermal-sensors = <&tsens 5>;
>
> trips {
> cpu0_1_alert0: trip-point@0 {
> @@ -209,7 +209,7 @@
> polling-delay-passive = <250>;
> polling-delay = <1000>;
>
> - thermal-sensors = <&tsens 3>;
> + thermal-sensors = <&tsens 4>;
>
> trips {
> cpu2_3_alert0: trip-point@0 {
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
