RE: [PATCH 4/4] arm64: dts: fsl: Remove num-lanes property from PCIe nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrew,

Thanks a lot for your review!

Regards,
Zhiqiang

> -----Original Message-----
> From: Andrew Murray <andrew.murray@xxxxxxx>
> Sent: 2019年8月12日 16:36
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; gustavo.pimentel@xxxxxxxxxxxx;
> jingoohan1@xxxxxxxxx; bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; Leo Li
> <leoyang.li@xxxxxxx>; lorenzo.pieralisi@xxxxxxx; M.h. Lian
> <minghuan.lian@xxxxxxx>
> Subject: Re: [PATCH 4/4] arm64: dts: fsl: Remove num-lanes property from
> PCIe nodes
> 
> On Mon, Aug 12, 2019 at 04:22:33AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > On FSL Layerscape SoCs, the number of lanes assigned to PCIe
> > controller is not fixed, it is determined by the selected SerDes
> > protocol in the RCW (Reset Configuration Word), and the PCIe link
> > training is completed automatically base on the selected SerDes
> > protocol, and the link width set-up is updated by hardware. So the
> > num-lanes is not needed to specify the link width.
> >
> > The current num-lanes indicates the max lanes PCIe controller can
> > support up to, instead of the lanes assigned to the PCIe controller.
> > This can result in PCIe link training fail after hot-reset. So remove
> > the num-lanes to avoid set-up to incorrect link width.
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > ---
> >  arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 -
> > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 ---
> > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 6 ------
> > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 ---
> > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ----
> >  5 files changed, 17 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > index ec6257a5b251..119c597ca867 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
> > @@ -486,7 +486,6 @@
> >  			#address-cells = <3>;
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> > -			num-lanes = <4>;
> >  			num-viewport = <2>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> > index 71d9ed9ff985..c084c7a4b6a6 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
> > @@ -677,7 +677,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -704,7 +703,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <2>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -731,7 +729,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <2>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > index b0ef08b090dd..d4c1da3d4bde 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> > @@ -649,7 +649,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <8>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -671,7 +670,6 @@
> >  			reg-names = "regs", "addr_space";
> >  			num-ib-windows = <6>;
> >  			num-ob-windows = <8>;
> > -			num-lanes = <2>;
> >  			status = "disabled";
> >  		};
> >
> > @@ -687,7 +685,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <2>;
> >  			num-viewport = <8>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -709,7 +706,6 @@
> >  			reg-names = "regs", "addr_space";
> >  			num-ib-windows = <6>;
> >  			num-ob-windows = <8>;
> > -			num-lanes = <2>;
> >  			status = "disabled";
> >  		};
> >
> > @@ -725,7 +721,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <2>;
> >  			num-viewport = <8>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -747,7 +742,6 @@
> >  			reg-names = "regs", "addr_space";
> >  			num-ib-windows = <6>;
> >  			num-ob-windows = <8>;
> > -			num-lanes = <2>;
> >  			status = "disabled";
> >  		};
> >
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > index dfbead405783..76c87afeba1e 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
> > @@ -456,7 +456,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <256>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -482,7 +481,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > @@ -508,7 +506,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <8>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0
> 0x00010000   /* downstream I/O */
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > index 64101c9962ce..7a0be8eaa84a 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> > @@ -639,7 +639,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			msi-parent = <&its>;
> > @@ -661,7 +660,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			msi-parent = <&its>;
> > @@ -683,7 +681,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <8>;
> >  			num-viewport = <256>;
> >  			bus-range = <0x0 0xff>;
> >  			msi-parent = <&its>;
> > @@ -705,7 +702,6 @@
> >  			#size-cells = <2>;
> >  			device_type = "pci";
> >  			dma-coherent;
> > -			num-lanes = <4>;
> >  			num-viewport = <6>;
> >  			bus-range = <0x0 0xff>;
> >  			msi-parent = <&its>;
> 
> Reviewed-by: Andrew Murray <andrew.murray@xxxxxxx>
> 
> > --
> > 2.17.1
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux