On 8/7/19 8:37 PM, Rayagonda Kokatanur wrote:
From: Lori Hikichi <lori.hikichi@xxxxxxxxxxxx>
The driver does not support the SMBUS Quick command so remove the
flag that indicates that level of support.
By default the i2c_detect tool uses the quick command to try and
detect devices at some bus addresses. If the quick command is used
then we will not detect the device, even though it is present.
Fixes: e6e5dd3566e0 (i2c: iproc: Add Broadcom iProc I2C Driver)
Signed-off-by: Lori Hikichi <lori.hikichi@xxxxxxxxxxxx>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-bcm-iproc.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index d7fd76b..19ef2b0 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -790,7 +790,10 @@ static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
{
- u32 val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+ u32 val;
+
+ /* We do not support the SMBUS Quick command */
+ val = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
if (adap->algo->reg_slave)
val |= I2C_FUNC_SLAVE;
Change looks good to me. Thanks.
Reviewed-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
