Hi,
The subject prefix should be "ARM: dts: at91:"
On 01/08/2019 00:00:45+0200, Uwe Kleine-König wrote:
> - newline between properties and sub-nodes
> - use tags from included dtsi instead of duplicating the hierarchy
> - status should be the last property
> - drop duplicated alias
>
> There are no differences in the generated .dtb
>
> Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
> ---
> Hello,
>
> these are the style rules I was teached when modifying imx dts files.
> Do they apply to at91, too?
>
> Best regards
> Uwe
>
> arch/arm/boot/dts/at91-ariettag25.dts | 87 +++++++++++++--------------
> 1 file changed, 43 insertions(+), 44 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
> index 7a34c4dc05d2..8f9f5a22cbf6 100644
> --- a/arch/arm/boot/dts/at91-ariettag25.dts
> +++ b/arch/arm/boot/dts/at91-ariettag25.dts
> @@ -6,14 +6,11 @@
> */
> /dts-v1/;
> #include "at91sam9g25.dtsi"
> +
> / {
> model = "Acme Systems Arietta G25";
> compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
>
> - aliases {
> - serial0 = &dbgu;
> - };
> -
> chosen {
> stdout-path = "serial0:115200n8";
> };
> @@ -34,55 +31,16 @@
>
> ahb {
> apb {
> - mmc0: mmc@f0008000 {
> - pinctrl-0 = <
> - &pinctrl_mmc0_slot0_clk_cmd_dat0
> - &pinctrl_mmc0_slot0_dat1_3>;
> - status = "okay";
> -
> - slot@0 {
> - reg = <0>;
> - bus-width = <4>;
> - };
> - };
> -
> - tcb0: timer@f8008000 {
> - timer@0 {
> - compatible = "atmel,tcb-timer";
> - reg = <0>;
> - };
> -
> - timer@1 {
> - compatible = "atmel,tcb-timer";
> - reg = <1>;
> - };
> - };
> -
> - usb2: gadget@f803c000 {
> - status = "okay";
> - };
> -
> - dbgu: serial@fffff200 {
> - status = "okay";
> - };
> -
> rtc@fffffeb0 {
You can had a label to the rtc in a preliminary patch so you can remove
the hierarchy.
> status = "okay";
> };
> };
>
> - usb0: ohci@600000 {
> - status = "okay";
> - num-ports = <3>;
> - };
> -
> - usb1: ehci@700000 {
> - status = "okay";
> - };
> };
>
> leds {
> compatible = "gpio-leds";
> +
> arietta_led {
> label = "arietta_led";
> gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
> @@ -90,3 +48,44 @@
> };
> };
> };
> +
> +&dbgu {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + pinctrl-0 = <
> + &pinctrl_mmc0_slot0_clk_cmd_dat0
> + &pinctrl_mmc0_slot0_dat1_3>;
> + status = "okay";
> +
> + slot@0 {
> + reg = <0>;
> + bus-width = <4>;
> + };
> +};
> +
> +&tcb0 {
> + timer@0 {
> + compatible = "atmel,tcb-timer";
> + reg = <0>;
> + };
> +
> + timer@1 {
> + compatible = "atmel,tcb-timer";
> + reg = <1>;
> + };
> +};
> +
> +&usb0 {
> + num-ports = <3>;
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> --
> 2.20.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
