On Sun, Aug 11, 2019 at 5:05 PM Bhushan Shah <bshah@xxxxxxx> wrote:
>
> Add device-tree nodes for i2c0 to i2c2, and also add relevant pinctrl
> nodes.
>
> Suggested-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Bhushan Shah <bshah@xxxxxxx>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 54 ++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index bcecca17d61d..1d9ad3ec0b65 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -329,6 +329,21 @@
> function = "hdmi";
> };
>
> + i2c0_pins: i2c0-pins {
> + pins = "PD25", "PD26";
> + function = "i2c0";
> + };
> +
> + i2c1_pins: i2c1-pins {
> + pins = "PH5", "PH6";
> + function = "i2c1";
> + };
> +
> + i2c2_pins: i2c2-pins {
> + pins = "PD23", "PD24";
> + function = "i2c2";
> + };
> +
> mmc0_pins: mmc0-pins {
> pins = "PF0", "PF1", "PF2", "PF3",
> "PF4", "PF5";
> @@ -464,6 +479,45 @@
> status = "disabled";
> };
>
> + i2c0: i2c@5002000 {
> + compatible = "allwinner,sun6i-a31-i2c";
Please add an soc-specific compatible string, like "allwinner,sun50i-h6-i2c".
This is a last-resort way out in case the hardware isn't so compatible with
the A31.
You'll also need to update the bindings in
Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
The file also shows that we do this for other chips, such as the A23,
A64 and A83T.
ChenYu
> + reg = <0x05002000 0x400>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C0>;
> + resets = <&ccu RST_BUS_I2C0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c1: i2c@5002400 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x05002400 0x400>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C1>;
> + resets = <&ccu RST_BUS_I2C1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c2: i2c@5002800 {
> + compatible = "allwinner,sun6i-a31-i2c";
> + reg = <0x05002800 0x400>;
> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2C2>;
> + resets = <&ccu RST_BUS_I2C2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> + status = "disabled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> emac: ethernet@5020000 {
> compatible = "allwinner,sun50i-h6-emac",
> "allwinner,sun50i-a64-emac";
> --
> 2.17.1
>
