Hi Yangtao, On 10/08/2019 07:28, Yangtao Li wrote:
This patchset add support for A64, H3, H5, H6 and R40 thermal sensor.
Could you add the device-tree configuration in the same series? This will allow user to test it. Thanks, Clément
Thx to Icenowy and Vasily. BTY, do a cleanup in thermal makfile. Icenowy Zheng (3): thermal: sun8i: allow to use custom temperature calculation function thermal: sun8i: add support for Allwinner H5 thermal sensor thermal: sun8i: add support for Allwinner R40 thermal sensor Vasily Khoruzhick (1): thermal: sun8i: add thermal driver for A64 Yangtao Li (14): thermal: sun8i: add thermal driver for h6 dt-bindings: thermal: add binding document for h6 thermal controller thermal: fix indentation in makefile thermal: sun8i: get ths sensor number from device compatible thermal: sun8i: rework for sun8i_ths_get_temp() thermal: sun8i: get ths init func from device compatible thermal: sun8i: rework for ths irq handler func thermal: sun8i: support mod clocks thermal: sun8i: rework for ths calibrate func dt-bindings: thermal: add binding document for h3 thermal controller thermal: sun8i: add thermal driver for h3 dt-bindings: thermal: add binding document for a64 thermal controller dt-bindings: thermal: add binding document for h5 thermal controller dt-bindings: thermal: add binding document for r40 thermal controller .../bindings/thermal/sun8i-thermal.yaml | 157 +++++ MAINTAINERS | 7 + drivers/thermal/Kconfig | 14 + drivers/thermal/Makefile | 9 +- drivers/thermal/sun8i_thermal.c | 596 ++++++++++++++++++ 5 files changed, 779 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml create mode 100644 drivers/thermal/sun8i_thermal.c --- v5: -add more support -some trival fix --- 2.17.1
