09.08.2019 2:46, Sowjanya Komatineni пишет:
> This patch implements save and restore of pllout context.
>
> During system suspend, core power goes off and looses the settings
> of the Tegra CAR controller registers.
>
> So during suspend entry the state of pllout is saved and on resume
> it is restored back to have pllout in same state as before suspend.
>
> pllout rate is saved and restore in clock divider so it will be at
> same rate as before suspend when pllout state is restored.
>
> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
> ---
> drivers/clk/tegra/clk-pll-out.c | 9 +++++++++
> drivers/clk/tegra/clk-tegra210.c | 3 ++-
> drivers/clk/tegra/clk.h | 6 ++++++
> 3 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-pll-out.c b/drivers/clk/tegra/clk-pll-out.c
> index 35f2bf00e1e6..d8bf89a81e6d 100644
> --- a/drivers/clk/tegra/clk-pll-out.c
> +++ b/drivers/clk/tegra/clk-pll-out.c
> @@ -69,10 +69,19 @@ static void clk_pll_out_disable(struct clk_hw *hw)
> spin_unlock_irqrestore(pll_out->lock, flags);
> }
>
> +static void tegra_clk_pll_out_restore_context(struct clk_hw *hw)
> +{
> + if (!__clk_get_enable_count(hw->clk))
> + clk_pll_out_disable(hw);
> + else
> + clk_pll_out_enable(hw);
> +}
> +
> const struct clk_ops tegra_clk_pll_out_ops = {
> .is_enabled = clk_pll_out_is_enabled,
> .enable = clk_pll_out_enable,
> .disable = clk_pll_out_disable,
> + .restore_context = tegra_clk_pll_out_restore_context,
> };
>
> struct clk *tegra_clk_register_pll_out(const char *name,
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index df172d5772d7..4721ee030d1c 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -3200,7 +3200,8 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
> 8, 8, 1, NULL);
> clk = tegra_clk_register_pll_out("pll_re_out1", "pll_re_out1_div",
> clk_base + PLLRE_OUT1, 1, 0,
> - CLK_SET_RATE_PARENT, 0, NULL);
> + CLK_SET_RATE_PARENT, TEGRA_PLLRE_OUT,
> + NULL);
> clks[TEGRA210_CLK_PLL_RE_OUT1] = clk;
>
> /* PLLE */
> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
> index 905bf1096558..a464524fbc90 100644
> --- a/drivers/clk/tegra/clk.h
> +++ b/drivers/clk/tegra/clk.h
> @@ -437,6 +437,10 @@ struct clk *tegra_clk_register_pllu_tegra210(const char *name,
> * @rst_bit_idx: bit to reset PLL divider
> * @lock: register lock
> * @flags: hardware-specific flags
> + *
> + * Flags:
> + * TEGRA_PLLRE_OUT - This flag indicates that it is PLLRE_OUT and is used to
> + * identify PLLRE_OUT during clk_pll_out save and restore.
> */
> struct tegra_clk_pll_out {
> struct clk_hw hw;
> @@ -447,6 +451,8 @@ struct tegra_clk_pll_out {
> u8 flags;
> };
>
> +#define TEGRA_PLLRE_OUT BIT(0)
> +
> #define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
>
> extern const struct clk_ops tegra_clk_pll_out_ops;
>
Looks like the TEGRA_PLLRE_OUT flag is unused.
