Re: [PATCH v9 0/7] Solve postboot supplier cleanup and optimize probe ordering

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Saravana,

On 7/31/19 3:17 PM, Saravana Kannan wrote:
> Add device-links to track functional dependencies between devices
> after they are created (but before they are probed) by looking at
> their common DT bindings like clocks, interconnects, etc.
> 
> Having functional dependencies automatically added before the devices
> are probed, provides the following benefits:
> 
> - Optimizes device probe order and avoids the useless work of
>   attempting probes of devices that will not probe successfully
>   (because their suppliers aren't present or haven't probed yet).
> 
>   For example, in a commonly available mobile SoC, registering just
>   one consumer device's driver at an initcall level earlier than the
>   supplier device's driver causes 11 failed probe attempts before the
>   consumer device probes successfully. This was with a kernel with all
>   the drivers statically compiled in. This problem gets a lot worse if
>   all the drivers are loaded as modules without direct symbol
>   dependencies.
> 
> - Supplier devices like clock providers, interconnect providers, etc
>   need to keep the resources they provide active and at a particular
>   state(s) during boot up even if their current set of consumers don't
>   request the resource to be active. This is because the rest of the
>   consumers might not have probed yet and turning off the resource
>   before all the consumers have probed could lead to a hang or
>   undesired user experience.
> 
>   Some frameworks (Eg: regulator) handle this today by turning off
>   "unused" resources at late_initcall_sync and hoping all the devices
>   have probed by then. This is not a valid assumption for systems with
>   loadable modules. Other frameworks (Eg: clock) just don't handle
>   this due to the lack of a clear signal for when they can turn off
>   resources. This leads to downstream hacks to handle cases like this
>   that can easily be solved in the upstream kernel.
> 
>   By linking devices before they are probed, we give suppliers a clear
>   count of the number of dependent consumers. Once all of the
>   consumers are active, the suppliers can turn off the unused
>   resources without making assumptions about the number of consumers.
> 
> By default we just add device-links to track "driver presence" (probe
> succeeded) of the supplier device. If any other functionality provided
> by device-links are needed, it is left to the consumer/supplier
> devices to change the link when they probe.
> 
> v1 -> v2:
> - Drop patch to speed up of_find_device_by_node()
> - Drop depends-on property and use existing bindings
> 
> v2 -> v3:
> - Refactor the code to have driver core initiate the linking of devs
> - Have driver core link consumers to supplier before it's probed
> - Add support for drivers to edit the device links before probing
> 
> v3 -> v4:
> - Tested edit_links() on system with cyclic dependency. Works.
> - Added some checks to make sure device link isn't attempted from
>   parent device node to child device node.
> - Added way to pause/resume sync_state callbacks across
>   of_platform_populate().
> - Recursively parse DT node to create device links from parent to
>   suppliers of parent and all child nodes.
> 
> v4 -> v5:
> - Fixed copy-pasta bugs with linked list handling
> - Walk up the phandle reference till I find an actual device (needed
>   for regulators to work)
> - Added support for linking devices from regulator DT bindings
> - Tested the whole series again to make sure cyclic dependencies are
>   broken with edit_links() and regulator links are created properly.
> 
> v5 -> v6:
> - Split, squashed and reordered some of the patches.
> - Refactored the device linking code to follow the same code pattern for
>   any property.
> 
> v6 -> v7:
> - No functional changes.
> - Renamed i to index
> - Added comment to clarify not having to check property name for every
>   index
> - Added "matched" variable to clarify code. No functional change.
> - Added comments to include/linux/device.h for add_links()
> 
> v7 -> v8:
> - Rebased on top of linux-next to handle device link changes in [1]
> 


> v8 -> v9:
> - Fixed kbuild test bot reported errors (docs and const)

Some maintainers have strong opinions about whether change logs should be:

  (1) only in patch 0
  (2) only in the specific patches that are changed
  (3) both in patch 0 and in the specific patches that are changed.

I can adapt to any of the three styles.  But for style "(1)" please
list which specific patch has changed for each item in the change list.

-Frank


> 
> [1] - https://lore.kernel.org/lkml/2305283.AStDPdUUnE@kreacher/
> 
> -Saravana
> 
> 
> Saravana Kannan (7):
>   driver core: Add support for linking devices during device addition
>   driver core: Add edit_links() callback for drivers
>   of/platform: Add functional dependency link from DT bindings
>   driver core: Add sync_state driver/bus callback
>   of/platform: Pause/resume sync state during init and
>     of_platform_populate()
>   of/platform: Create device links for all child-supplier depencencies
>   of/platform: Don't create device links for default busses
> 
>  .../admin-guide/kernel-parameters.txt         |   5 +
>  drivers/base/core.c                           | 168 ++++++++++++++++
>  drivers/base/dd.c                             |  29 +++
>  drivers/of/platform.c                         | 189 ++++++++++++++++++
>  include/linux/device.h                        |  60 ++++++
>  5 files changed, 451 insertions(+)
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux