It helps to keep sorted order for compatibles and nodes, so sort them Suggested-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> --- .../regulator/qcom,rpmh-regulator.txt | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index 1a9cab50503a..bab9f71140b8 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -22,12 +22,12 @@ RPMh resource. The names used for regulator nodes must match those supported by a given PMIC. Supported regulator node names: - PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 - PMI8998: bob PM8005: smps1 - smps4 + PM8009: smps1 - smps2, ldo1 - ldo7 PM8150: smps1 - smps10, ldo1 - ldo18 PM8150L: smps1 - smps8, ldo1 - ldo11, bob, flash, rgb - PM8009: smps1 - smps2, ld01 - ldo7 + PM8998: smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + PMI8998: bob ======================== First Level Nodes - PMIC @@ -36,12 +36,13 @@ First Level Nodes - PMIC - compatible Usage: required Value type: <string> - Definition: Must be one of: "qcom,pm8998-rpmh-regulators", - "qcom,pmi8998-rpmh-regulators" or - "qcom,pm8005-rpmh-regulators" or - "qcom,pm8150-rpmh-regulators" or - "qcom,pm8150l-rpmh-regulators" or - "qcom,pm8009-rpmh-regulators". + Definition: Must be one of below: + "qcom,pm8005-rpmh-regulators" + "qcom,pm8009-rpmh-regulators" + "qcom,pm8150-rpmh-regulators" + "qcom,pm8150l-rpmh-regulators" + "qcom,pm8998-rpmh-regulators" + "qcom,pmi8998-rpmh-regulators" - qcom,pmic-id Usage: required -- 2.20.1
