This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker
Amplifier. This Amplifier also has a simple thermal sensor for
over temperature and speaker protection.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
.../bindings/sound/qcom,wsa881x.txt | 27 +++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt b/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt
new file mode 100644
index 000000000000..582db402a482
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.txt
@@ -0,0 +1,27 @@
+Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+WSA8810 is a class-D smart speaker amplifier and WSA8815 is a high-output
+power class-D smart speaker amplifier. This amplifier uses SoundWire
+digital audio as primary interface.
+
+Required properties with SoundWire Interface:
+
+- compatible: Should be textual representation of SoundWire Enumeration
+ address.
+ Refer to soundwire/bus.txt for details.
+ Should be "sdw10,0217,2010,0" for WSA8810
+- sdw-instance-id: Should be ('Instance ID') from SoundWire Enumeration
+ address.
+ Refer to soundwire/bus.txt for details.
+- pd-gpios: Should be phandle and gpio pair for
+ Powerdown/Shutdown pin.
+- #thermal-sensor-cells: Should be 0
+
+Example:
+
+spkr_left:wsa8810-left{
+ compatible = "sdw10,0217,2010,0";
+ sdw-instance-id = <1>;
+ #thermal-sensor-cells = <0>;
+ ...
+};
--
2.21.0
