This change implements retrieving all the error counters from the PHY.
The PHY supports several error counters/stats. The `Mean Square Errors`
status values are only valie when a link is established, and shouldn't be
accumulated. These values characterize the quality of a signal.
The rest of the error counters are self-clearing on read.
Most of them are reports from the Frame Checker engine that the PHY has.
Not retrieving the `LPI Wake Error Count Register` here, since that is used
by the PHY framework to check for any EEE errors. And that register is
self-clearing when read (as per IEEE spec).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
---
drivers/net/phy/adin.c | 109 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
index d6d1f5037eb7..d170d1e837b5 100644
--- a/drivers/net/phy/adin.c
+++ b/drivers/net/phy/adin.c
@@ -155,12 +155,40 @@ static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
{ MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG },
};
+struct adin_hw_stat {
+ const char *string;
+ u16 reg1;
+ u16 reg2;
+ bool do_not_accumulate;
+};
+
+/* Named just like in the datasheet */
+static struct adin_hw_stat adin_hw_stats[] = {
+ { "RxErrCnt", 0x0014, },
+ { "MseA", 0x8402, 0, true },
+ { "MseB", 0x8403, 0, true },
+ { "MseC", 0x8404, 0, true },
+ { "MseD", 0x8405, 0, true },
+ { "FcFrmCnt", 0x940A, 0x940B }, /* FcFrmCntH + FcFrmCntL */
+ { "FcLenErrCnt", 0x940C },
+ { "FcAlgnErrCnt", 0x940D },
+ { "FcSymbErrCnt", 0x940E },
+ { "FcOszCnt", 0x940F },
+ { "FcUszCnt", 0x9410 },
+ { "FcOddCnt", 0x9411 },
+ { "FcOddPreCnt", 0x9412 },
+ { "FcDribbleBitsCnt", 0x9413 },
+ { "FcFalseCarrierCnt", 0x9414 },
+};
+
/**
* struct adin_priv - ADIN PHY driver private data
* edpd_enabled true if Energy Detect Powerdown mode is enabled
+ * stats statistic counters for the PHY
*/
struct adin_priv {
bool edpd_enabled;
+ u64 stats[ARRAY_SIZE(adin_hw_stats)];
};
static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
@@ -561,6 +589,81 @@ static int adin_reset(struct phy_device *phydev)
return adin_subsytem_soft_reset(phydev);
}
+static int adin_get_sset_count(struct phy_device *phydev)
+{
+ return ARRAY_SIZE(adin_hw_stats);
+}
+
+static void adin_get_strings(struct phy_device *phydev, u8 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) {
+ strlcpy(&data[i * ETH_GSTRING_LEN],
+ adin_hw_stats[i].string, ETH_GSTRING_LEN);
+ }
+}
+
+static int adin_read_mmd_stat_regs(struct phy_device *phydev,
+ struct adin_hw_stat *stat,
+ u32 *val)
+{
+ int ret;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1);
+ if (ret < 0)
+ return ret;
+
+ *val = (ret & 0xffff);
+
+ if (stat->reg2 == 0)
+ return 0;
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2);
+ if (ret < 0)
+ return ret;
+
+ *val <<= 16;
+ *val |= (ret & 0xffff);
+
+ return 0;
+}
+
+static u64 adin_get_stat(struct phy_device *phydev, int i)
+{
+ struct adin_hw_stat *stat = &adin_hw_stats[i];
+ struct adin_priv *priv = phydev->priv;
+ u32 val;
+ int ret;
+
+ if (stat->reg1 > 0x1f) {
+ ret = adin_read_mmd_stat_regs(phydev, stat, &val);
+ if (ret < 0)
+ return (u64)(~0);
+ } else {
+ ret = phy_read(phydev, stat->reg1);
+ if (ret < 0)
+ return (u64)(~0);
+ val = (ret & 0xffff);
+ }
+
+ if (stat->do_not_accumulate)
+ priv->stats[i] = val;
+ else
+ priv->stats[i] += val;
+
+ return priv->stats[i];
+}
+
+static void adin_get_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
+ data[i] = adin_get_stat(phydev, i);
+}
+
static int adin_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -588,6 +691,9 @@ static struct phy_driver adin_driver[] = {
.get_features = genphy_read_abilities,
.ack_interrupt = adin_phy_ack_intr,
.config_intr = adin_phy_config_intr,
+ .get_sset_count = adin_get_sset_count,
+ .get_strings = adin_get_strings,
+ .get_stats = adin_get_stats,
.resume = genphy_resume,
.suspend = genphy_suspend,
.read_mmd = adin_read_mmd,
@@ -603,6 +709,9 @@ static struct phy_driver adin_driver[] = {
.get_features = genphy_read_abilities,
.ack_interrupt = adin_phy_ack_intr,
.config_intr = adin_phy_config_intr,
+ .get_sset_count = adin_get_sset_count,
+ .get_strings = adin_get_strings,
+ .get_stats = adin_get_stats,
.resume = genphy_resume,
.suspend = genphy_suspend,
.read_mmd = adin_read_mmd,
--
2.20.1
