Re: [PATCH 2/4] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Tomasz,


On 18 April 2014 20:12, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
> When CPU topology is specified in device tree, cpu_logical_map() does
> not return core ID anymore, but rather full MPIDR value. This breaks
> existing calculation of PMU register offsets on Exynos SoCs.
>
> This patch fixes the problem by adjusting the code to use only core ID
> bits of the value returned by cpu_logical_map() to allow CPU topology to
> be specified in device tree on Exynos SoCs.
>
> Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
> ---
>  arch/arm/mach-exynos/hotplug.c | 10 ++++++----
>  arch/arm/mach-exynos/platsmp.c | 31 ++++++++++++++++++-------------
>  2 files changed, 24 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
> index 7e0f31a..8a5f07d 100644
> --- a/arch/arm/mach-exynos/hotplug.c
> +++ b/arch/arm/mach-exynos/hotplug.c
> @@ -92,11 +92,13 @@ static inline void cpu_leave_lowpower(void)
>
>  static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
>  {
> +       u32 mpidr = cpu_logical_map(cpu);
> +       u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
> +
>         for (;;) {
>
> -               /* make cpu1 to be turned off at next WFI command */
> -               if (cpu == 1)
> -                       __raw_writel(0, S5P_ARM_CORE_CONFIGURATION(1));

I think this macro is not yet in ML code.

> +               /* Turn the CPU off on next WFI instruction. */
> +               __raw_writel(0, S5P_ARM_CORE_CONFIGURATION(core_id));
>
>                 /*
>                  * here's the WFI
> @@ -106,7 +108,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
>                     :
>                     : "memory", "cc");
>
> -               if (pen_release == cpu_logical_map(cpu)) {
> +               if (pen_release == core_id) {
>                         /*
>                          * OK, proper wakeup, we're done
>                          */
> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> index 7b7de4b..e08b2c5 100644
> --- a/arch/arm/mach-exynos/platsmp.c
> +++ b/arch/arm/mach-exynos/platsmp.c
> @@ -89,7 +89,9 @@ static void exynos_secondary_init(unsigned int cpu)
>  static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
>  {
>         unsigned long timeout;
> -       unsigned long phys_cpu = cpu_logical_map(cpu);
> +       u32 mpidr = cpu_logical_map(cpu);
> +       u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
> +       u32 reg;
>
>         /*
>          * Set synchronisation state between this boot processor
> @@ -102,19 +104,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
>          * the holding pen - release it, then wait for it to flag
>          * that it has been released by resetting pen_release.
>          *
> -        * Note that "pen_release" is the hardware CPU ID, whereas
> +        * Note that "pen_release" is the hardware CPU core ID, whereas
>          * "cpu" is Linux's internal ID.
>          */
> -       write_pen_release(phys_cpu);
> +       write_pen_release(core_id);
>
> -       if (!(__raw_readl(S5P_ARM_CORE_STATUS(1)) & S5P_CORE_LOCAL_PWR_EN)) {
> +       reg = __raw_readl(S5P_ARM_CORE_STATUS(core_id));
> +       if (!(reg & S5P_CORE_LOCAL_PWR_EN)) {
>                 __raw_writel(S5P_CORE_LOCAL_PWR_EN,
> -                            S5P_ARM_CORE_CONFIGURATION(1));
> +                            S5P_ARM_CORE_CONFIGURATION(core_id));
>
>                 timeout = 10;
>
>                 /* wait max 10 ms until cpu1 is on */
> -               while ((__raw_readl(S5P_ARM_CORE_STATUS(1))
> +               while ((__raw_readl(S5P_ARM_CORE_STATUS(core_id))
>                         & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
>                         if (timeout-- == 0)
>                                 break;
> @@ -146,10 +149,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
>                  * Try to set boot address using firmware first
>                  * and fall back to boot register if it fails.
>                  */
> -               if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
> -                       __raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
> +               if (call_firmware_op(set_cpu_boot_addr, core_id, boot_addr))
> +                       __raw_writel(boot_addr, cpu_boot_reg(core_id));
>
> -               call_firmware_op(cpu_boot, phys_cpu);
> +               call_firmware_op(cpu_boot, core_id);
>
>                 arch_send_wakeup_ipi_mask(cpumask_of(cpu));
>
> @@ -215,14 +218,16 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
>          * boot register if it fails.
>          */
>         for (i = 1; i < max_cpus; ++i) {
> -               unsigned long phys_cpu;
>                 unsigned long boot_addr;
> +               u32 mpidr;
> +               u32 core_id;
>
> -               phys_cpu = cpu_logical_map(i);
> +               mpidr = cpu_logical_map(i);
> +               core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
>                 boot_addr = virt_to_phys(exynos4_secondary_startup);
>
> -               if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr))
> -                       __raw_writel(boot_addr, cpu_boot_reg(phys_cpu));
> +               if (call_firmware_op(set_cpu_boot_addr, core_id, boot_addr))
> +                       __raw_writel(boot_addr, cpu_boot_reg(core_id));
>         }
>  }
>
> --
> 1.9.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux